Page 1 of 3
gargoyle-ispy 2016-March-07 20:57.torrent
Posted: Mon Mar 07, 2016 5:07 am
by ispyisail
USE AT YOUR OWN RISK
gargoyle-ispy 2016-March-07 20:57.torrent
https://goo.gl/Zbhr22
magnet:?xt=urn:btih:f0b18d8721db0ba8ef990532a5a34e9aa12722be&dn=gargoyle-ispy%202016-March-07%2020_57.7z&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a80&tr=udp%3a%2f%2fopen.demonii.com%3a1337&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969&tr=udp%3a%2f%2ftracker.leechers-paradise.org%3a6969
Routers
https://goo.gl/SnR97K
Lots of big changes
http://www.gargoyle-router.com/gargoyle
To many to list
Re: gargoyle-ispy 2016-March-07 20:57.torrent
Posted: Mon Mar 07, 2016 5:37 am
by tapper
Downloading now will check back soon.
Re: gargoyle-ispy 2016-March-07 20:57.torrent
Posted: Mon Mar 07, 2016 7:02 am
by tapper
Flashed to my c7v2 all seems good. Anything you wood like me to test?
Re: gargoyle-ispy 2016-March-07 20:57.torrent
Posted: Mon Mar 07, 2016 9:25 am
by MucuCat
i tryed the last 2 Ispy updates on my wr841n and i get really low download speed without qos.
without router i get 9ms ping 24,8mbps download and 4,9 upload
with router i get 16ms ping 15,8mbps download and 4,6upload
am i doing something wrong?
Re: gargoyle-ispy 2016-March-07 20:57.torrent
Posted: Mon Mar 07, 2016 3:17 pm
by tapper
found a bug
I updated my mane AP c7v2 to this build.
I have 2 Repeaters they both still get IPs through DHCP but no pages will load.
Had to flash back a older build.
1 of my Repeaters is stil on 1.62 and the n750 is on 1.9
Re: gargoyle-ispy 2016-March-07 20:57.torrent
Posted: Mon Mar 07, 2016 3:26 pm
by simono_pl
Downloading and when I restore to life my TP-Link WR842NDv1 will be testing and of course keeping torrent life after download but with small upload (I have low upload link).
Re: gargoyle-ispy 2016-March-07 20:57.torrent
Posted: Mon Mar 07, 2016 3:51 pm
by ektus
Got the archive and have the torrent active, dedicated a spare Gargoyle router to the task. Only 100kBps upload speed, though.
I might test on my Archer C5, but as it's essentially the same as tapper's C7, it might just confirm his bug report.
Is it safe to keep settings when upgrading from the last ispy build (feb. 20)?
Regards
Ektus.
Re: gargoyle-ispy 2016-March-07 20:57.torrent
Posted: Mon Mar 07, 2016 4:05 pm
by tapper
all my wifi devices work except my 2 Repeater.
Re: gargoyle-ispy 2016-March-07 20:57.torrent
Posted: Mon Mar 07, 2016 5:02 pm
by Lantis
I'm working on repeaters.
Re: gargoyle-ispy 2016-March-07 20:57.torrent
Posted: Mon Mar 07, 2016 8:27 pm
by Himmig
Hi guys,
I am new to the forum but I have been using Gargoyle for quite some time - great piece of software and the easiest to use!
Has someone tested wherever the latest build works with the Archer C7 v2 in terms of connecting to a 5ghz (ac/n) TP-Link router in client mode (gateway) and AP (2.4ghz + 5hz)?
I had to move to DD-WRT temporarily because the C7 can connect to the router on 2.4ghz and AP (2.4ghz + 5ghz) but not when trying to connect over 5ghz (ac/n) - same on release 1.8.1 and 1.9.0.
FYI: DD-WRT (latest build) works but only 5ghz client + 2.4ghz AP (5ghz virtual AP is instable and breaks down after a few connection attempts).
Looks to me like the 5ghz channel on the C7 is a beast to stabilise.
Cheers guys and let me know if I can do anything to narrow down the problem.