Power Levels For the 2.4GHZ Radio (FW 1.8.1. WZR-HP-AG300)
Posted: Wed Feb 24, 2016 12:41 pm
Good day
My Buffalo WZR-HP-AG300 router shows that the 2.4GHZ radio can be set up to 30dBm output power to the antenna, is this factually true ?
My experience with DDWRT for these routers was that you couldnt set it higher than about 17.5dBm, which I typically would verify by SSH'ing into the router and checking the ath0 radio parameters. (The power seems to be set at a maximum in some EPROM config.)
What are your views and experiences ?
If 30 dBm is actually true, great for me since it will give me greater radio range on this band.
Thanks
Kgotso
LinkedIn Profile:
https://www.linkedin.com/pub/kgotso-gaa ... 14/792/933
My Buffalo WZR-HP-AG300 router shows that the 2.4GHZ radio can be set up to 30dBm output power to the antenna, is this factually true ?
My experience with DDWRT for these routers was that you couldnt set it higher than about 17.5dBm, which I typically would verify by SSH'ing into the router and checking the ath0 radio parameters. (The power seems to be set at a maximum in some EPROM config.)
What are your views and experiences ?
If 30 dBm is actually true, great for me since it will give me greater radio range on this band.
Thanks
Kgotso
LinkedIn Profile:
https://www.linkedin.com/pub/kgotso-gaa ... 14/792/933