Gargoyle Forum

USE AT YOUR OWN RISK

gargoyle-ispy 2016-February-16 19:03.torrent
https://goo.gl/vDqb2Z

magnet:?xt=urn:btih:e732eaf00302d31a6b9d9abd50c3f3224283ef89&dn=gargoyle-ispy%202016-February-16%2019_03.7z&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a80&tr=udp%3a%2f%2fopen.demonii.com%3a1337&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969&tr=udp%3a%2f%2ftracker.leechers-paradise.org%3a6969



Routers
https://goo.gl/eQJtrU


Lots of stuff

German Language

wr842 should be in usb profile

Update Adblock plugin to v1.1.1

Add Spectrum Analyser plugin (v1.0.0)

HI thx for your work! installed new version and i still have adblock plugin 1.0.4, am i doing anything wrong?

czhook wrote:HI thx for your work! installed new version and i still have adblock plugin 1.0.4, am i doing anything wrong?

Adblock plugin version > 1.0.4 is hosted on my website.
Until a new official release comes out this will be the case.
You can find all the details in the Adblock plugin thread.

Not sure if this is due to my retention of previous settings (Feb 9th Build) and flashing it. But this recent update seems to be working fine except for the qos_distribution.sh which is currently not rendering the charts at all regardless of the selection for time frame(s) for both up/down.

If someone can chime in on their update and see if they're having a similar issue would be great. I'm currently using WD MyNet N600 router.

Perhaps later I can wipe and reconfig to see if it corrects the issue.

Other than that, great work!

Update
Issue was resolved by the reboot of the router. Thanks for the recommendation.

OK to install this with Preserve Settings? I'm on version Feb 9

neatomos wrote:Not sure if this is due to my retention of previous settings (Feb 9th Build) and flashing it. But this recent update seems to be working fine except for the qos_distribution.sh which is currently not rendering the charts at all regardless of the selection for time frame(s) for both up/down.

If someone can chime in on their update and see if they're having a similar issue would be great. I'm currently using WD MyNet N600 router.

Perhaps later I can wipe and reconfig to see if it corrects the issue.

Other than that, great work!

Sounds like your firewall got upset.
Reboot router should fix it.

Updated my Archer C7 v2 from 2016-February-12 using sysupgrade.bin and preserve settings.

Findings:

• Web Usage Monitor was turned on when it wasn't previously.
• UPnP & NAT-PMP was turned on when it wasn't previously.

Update Adblock plugin to v1.1.1
Add Spectrum Analyser plugin (v1.0.0)

I don't see either in Plugins. Only the default Sources (openwrt and gargoyle) are listed, if that helps.

Other than this it's running well

uninitialized wrote:Updated my Archer C7 v2 from 2016-February-12 using sysupgrade.bin and preserve settings.

Findings:

• Web Usage Monitor was turned on when it wasn't previously.
• UPnP & NAT-PMP was turned on when it wasn't previously.

Update Adblock plugin to v1.1.1
Add Spectrum Analyser plugin (v1.0.0)

I don't see either in Plugins. Only the default Sources (openwrt and gargoyle) are listed, if that helps.

Other than this it's running well

Web monitor turning itself on is a long standing bug with preserve settings. I haven't looked into it yet because it's mostly harmless.
I've always had upnp on so I haven't noticed that. Interesting.

The plugins aren't included by default. Ispyisail builds only update the firmware, not the plugins.

Lantis wrote:

czhook wrote:HI thx for your work! installed new version and i still have adblock plugin 1.0.4, am i doing anything wrong?

Adblock plugin version > 1.0.4 is hosted on my website.
Until a new official release comes out this will be the case.
You can find all the details in the Adblock plugin thread.

THX for you answer