Gargoyle Forum

Hi guys.. I've tried to add a rule for torrents.. but for some reason it doesn't go into my specified rule.. any thoughts on how to do this..


What I tried so far

1st Attempt

Destination: 10.0.1.5,
Application Protocol: BitTorrent

2nd

Destination: 10.0.1.5,
Destination Port: 32021,
Application Protocol: BitTorrent

3rd

Source Port: 32021,
Destination: 10.0.1.5,
Application Protocol: BitTorrent

4th

Destination Port: 32021,
Application Protocol: BitTorrent

Screenshot from the "Connection Lists"
http://imgur.com/PAG3n0b
http://imgur.com/BjjDxbS

*btw is the L7 protocol for bittorrent working?

No the L7 rules don't work anymore.

Destination, port, and match by UDP sounds good to me.

Can we see the remainder of your QOS settings please?

Download and Upload QoS Settings.

http://imgur.com/a/bIPGS


i'm using FW 1.8.1

Hi
i set it up like this for qbitorrent client:
qBittorrent:
Under Connection setup your specific port in your case: 32021
Under Advanced i assigned a specific port range for qbittorrent to use:
Start port: 32021+1 = 32022
End Port: 32021+1000 = 33021
So we have this port range 32021 - 33021 that we must cover.

For qos upload rules use:
Source IP: 10.0.1.5
Source ports: 32021 - 33021

For qos download rules:
Destination ip: 10.0.1.5
Destination ports: 32021 - 33021

Protocol is tcp+udp i think.

Hope that helps.

//edit
After seeing your post about your qos rules. your rules are also seeming a bit off.

I'm inclined to suggest you test with the rule at the top of the list just to make sure it's not being picked up by any other rule (I don't see why it would).

@shmo
I tried the settings but some how it sees the source port as gaming
http://imgur.com/2bfOX7m


@lantis
27000-28999 are steam source ports. when i set them to like this

Destination: 10.0.1.5,
Destination Port: 27000-28999,

there is no activity in the "gaming" services load. so i switched the port to source which the rule picks up the ports.

so I end up deleting some rules and classify my ip(and the other ip) to normal and set my default class to mobile which will be used by guest and mobile phones lol.. looks like it's working fine (i guess


http://imgur.com/9jCkW7Y

As long as it works

Good job.