Page 1 of 1
Is this a lost case? (tl-wdr4300)
Posted: Fri Nov 13, 2015 10:14 am
by _Knight_
Well, i changed my MTU to manual and 1472 and hit the save button, my router was conecting to the internet and then, as soon as it conects, it reboots, it did this thing a lot of times until i realized what was going on and i turned it off. Now when i turn it on, i can't get to its main page because it reboots after 20secs i turn it on...
What could i do?
sorry for bad english...
Re: Is this a lost case? (tl-wdr4300)
Posted: Fri Nov 13, 2015 1:10 pm
by Volaris
That sounds like something a failsafe reset should fix.
http://wiki.openwrt.org/doc/howto/generic.failsafe
It's not as scary/difficult as it seems. In general, disconnect your WAN cable, set your computer to 192.168.1.2 and connect to router. Unplug and plug power to router. When SYS light starts blinking, immediately press and hold reset or WPS button and SYS light should start blinking rapidly. If it didn't, restart and try again. Once that SYS light is blinking rapidly, telnet to 192.168.1.1 and Gargoyle text image should pop up. Then you can type firstboot and enter. Be patient until it finishes then restart.
What Gargoyle version were you running? If it wasn't one of the latest, you can always upgrade to 1.8.1 or 1.9.
Re: Is this a lost case? (tl-wdr4300)
Posted: Sun Nov 15, 2015 8:40 am
by _Knight_
It is the 1.8.1 version, i'm trying to do this but i don't know if i'm doing it right =/
it isn't working...
Re: Is this a lost case? (tl-wdr4300)
Posted: Sun Nov 15, 2015 8:47 am
by Lantis
What exactly did you do and what exactly isn't working?