troubles with bridging on wr1043nd
Posted: Mon Oct 19, 2015 3:54 pm
i have been messing around with my 1043ND to try some firmwares on it.
Last week i misflashed it and bricked it.
I unbricked it with this guide: http://sjoosten.nl/2013/07/unbrick-tl-wr1043nd.html
I managed to reflash it again after the unbrick with gargoyle_1.8.0-ar71xx-generic-tl-wr1043nd-v1-squashfs-sysupgrade
Before the brick i had this wr1043 configured as bridge client, and it worked fine. After this brck, i am not able to maintain a bridged connection. It seems to work for some time after i configure it as brdged client, but after a while i have no internet anymore through the 1043ND.
Is that still a wrong flash or whats going on?
The main router is an archer C7, on standard frmware
i also noticed that i can access the router wired, but not wireless(manual ip settings) and that it doesn't accept any settings i change
Last week i misflashed it and bricked it.
I unbricked it with this guide: http://sjoosten.nl/2013/07/unbrick-tl-wr1043nd.html
I managed to reflash it again after the unbrick with gargoyle_1.8.0-ar71xx-generic-tl-wr1043nd-v1-squashfs-sysupgrade
Before the brick i had this wr1043 configured as bridge client, and it worked fine. After this brck, i am not able to maintain a bridged connection. It seems to work for some time after i configure it as brdged client, but after a while i have no internet anymore through the 1043ND.
Is that still a wrong flash or whats going on?
The main router is an archer C7, on standard frmware
i also noticed that i can access the router wired, but not wireless(manual ip settings) and that it doesn't accept any settings i change