Gargoyle Forum

Hi all,
i'm trying to use QoS service of gargoyle version 1.8 on my device tp link 1041N Ver.2. But QoS service does not work at all.

when i chosen QoS upload and QoS Download in menu Firewall and set up maximal speed to slow on 12 kbps with this help viewtopic.php?f=12&t=7261.

And i used ftp client to download files over my gargoyle router tp-link 1041n Ver.2. the data rate can not be limited.

When i had checked ps command on ssh terminal,
it does not show qos_gargoyle service at all.


root@Gargoyle:/etc/rc.d# ps
PID USER VSZ STAT COMMAND
1 root 1456 S /sbin/procd
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW< [kworker/0:0H]
7 root 0 SW< [khelper]
60 root 0 SW< [writeback]
63 root 0 SW< [bioset]
65 root 0 SW< [kblockd]
95 root 0 SW [kswapd0]
141 root 0 SW [fsnotify_mark]
155 root 0 SW< [ath79-spi]
279 root 0 SW< [deferwq]
282 root 0 SW [kworker/0:2]
345 root 0 SWN [jffs2_gcd_mtd3]
394 root 884 S /sbin/ubusd
395 root 1376 S /bin/ash --login
749 root 0 SW< [cfg80211]
922 root 1036 S /sbin/logd -S 16
989 root 1364 S /usr/sbin/ntpd -n -l -p 0.pool.ntp.org -p 1.pool.ntp
1691 root 1480 S /sbin/netifd
2003 root 1580 S /usr/sbin/hostapd -P /var/run/wifi-phy0.pid -B /var/
3885 nobody 920 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf -k
6162 root 1580 S /usr/sbin/uhttpd -f -h /www -r Gargoyle -x /cgi-bin
15604 root 0 SW [kworker/u2:2]
16098 root 0 SW [kworker/0:1]
16103 root 0 SW [kworker/0:3]
16175 root 1360 R ps
16833 root 0 SW [kworker/u2:1]
root@Gargoyle:/etc/rc.d# /etc/init.d/qos_gargoyle restart
+ grep hfsc
+ awk {print $5}
+ tc qdisc show
+ delete_chain_from_table mangle qos_egress
+ delete_chain_from_table mangle qos_ingress
+ set +x
root@Gargoyle:/etc/rc.d# ps
PID USER VSZ STAT COMMAND
1 root 1456 S /sbin/procd
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW< [kworker/0:0H]
7 root 0 SW< [khelper]
60 root 0 SW< [writeback]
63 root 0 SW< [bioset]
65 root 0 SW< [kblockd]
95 root 0 SW [kswapd0]
141 root 0 SW [fsnotify_mark]
155 root 0 SW< [ath79-spi]
279 root 0 SW< [deferwq]
282 root 0 SW [kworker/0:2]
345 root 0 SWN [jffs2_gcd_mtd3]
394 root 884 S /sbin/ubusd
395 root 1376 S /bin/ash --login
749 root 0 SW< [cfg80211]
922 root 1036 S /sbin/logd -S 16
989 root 1364 S /usr/sbin/ntpd -n -l -p 0.pool.ntp.org -p 1.pool.ntp
1691 root 1480 S /sbin/netifd
2003 root 1580 S /usr/sbin/hostapd -P /var/run/wifi-phy0.pid -B /var/
3885 nobody 920 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf -k
6162 root 1580 S /usr/sbin/uhttpd -f -h /www -r Gargoyle -x /cgi-bin
15604 root 0 SW [kworker/u2:2]
16539 root 0 SW [kworker/0:3]
16833 root 0 SW [kworker/u2:1]
17093 root 0 SW [kworker/0:1]
17852 root 1360 R ps
root@Gargoyle:/etc/rc.d#


can you help me please? and show me how to active this qos service?
Thank you in advances

QOS only comes into effect when your WAN link is under full load and ping times are degraded - was this true during your test. To see what QoS is doing for you have a look at

Gargoyle - Firewall - QoS (Download) - QoS (Download) Active Congestion Control

Also I suspect you are looking for qosmon rather than qos_gargoyle in the process listing

Thank you nworbnhoj for your answer,
follow the introduction https://www.gargoyle-router.com/wiki/doku.php?id=qos

I think you are right, QoS mean i get guaranteed bandwidth, when WAN link is saturated.

i have done as you help with firewall
Gargoyle - Firewall - QoS (Download) - QoS (Download) Active Congestion Control is on

but qosmon is not active in terminal as i enter ps command line in the terminal

but after i restart my router at the beginning it show

root@Gargoyle:/# ps
PID USER VSZ STAT COMMAND
1 root 1392 S /sbin/procd
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW< [kworker/0:0H]
6 root 0 SW [kworker/u2:0]
7 root 0 SW< [khelper]
8 root 0 SW [kworker/u2:1]
60 root 0 SW< [writeback]
63 root 0 SW< [bioset]
65 root 0 SW< [kblockd]
90 root 0 SW [kworker/0:1]
95 root 0 SW [kswapd0]
141 root 0 SW [fsnotify_mark]
155 root 0 SW< [ath79-spi]
164 root 0 SW [kworker/u2:2]
279 root 0 SW< [deferwq]
282 root 0 SW [kworker/0:2]
346 root 0 SWN [jffs2_gcd_mtd3]
395 root 880 S /sbin/ubusd
396 root 1364 S /bin/ash --login
775 root 0 SW< [cfg80211]
780 root 0 SW [kworker/0:3]
923 root 1036 S /sbin/logd -S 16
957 root 1480 S /sbin/netifd
1005 root 1360 S /usr/sbin/ntpd -n -l -p 0.pool.ntp.org -p 1.pool.ntp
1029 root 1108 S /usr/sbin/dropbear -P /var/run/dropbear.1.pid -p 22
1064 root 1540 S /usr/sbin/uhttpd -f -h /www -r Gargoyle -x /cgi-bin
1091 root 1384 S {hotplug-call} /bin/sh /sbin/hotplug-call iface
1407 root 1576 S /usr/sbin/hostapd -P /var/run/wifi-phy0.pid -B /var/
1495 root 1388 S {hotplug-call} /bin/sh /sbin/hotplug-call iface
1497 root 1520 S {bwmon_gargoyle} /bin/sh /etc/rc.common /etc/init.d/
1528 root 1352 S sleep 1
1529 root 1360 R ps

then the service bwmon_gargoyle is disappeared, in the list of service
as followed

root@Gargoyle:/# [ 70.200000] ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
[ 70.210000] old minutes west=0, new minutes west=-60

root@Gargoyle:/# ps
PID USER VSZ STAT COMMAND
1 root 1392 S /sbin/procd
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW< [kworker/0:0H]
6 root 0 SW [kworker/u2:0]
7 root 0 SW< [khelper]
8 root 0 SW [kworker/u2:1]
60 root 0 SW< [writeback]
63 root 0 SW< [bioset]
65 root 0 SW< [kblockd]
90 root 0 SW [kworker/0:1]
95 root 0 SW [kswapd0]
141 root 0 SW [fsnotify_mark]
155 root 0 SW< [ath79-spi]
164 root 0 SW [kworker/u2:2]
279 root 0 SW< [deferwq]
282 root 0 SW [kworker/0:2]
346 root 0 SWN [jffs2_gcd_mtd3]
395 root 880 S /sbin/ubusd
396 root 1364 S /bin/ash --login
775 root 0 SW< [cfg80211]
780 root 0 SW [kworker/0:3]
923 root 1036 S /sbin/logd -S 16
957 root 1480 S /sbin/netifd
1005 root 1360 S /usr/sbin/ntpd -n -l -p 0.pool.ntp.org -p 1.pool.ntp
1029 root 1108 S /usr/sbin/dropbear -P /var/run/dropbear.1.pid -p 22
1064 root 1540 S /usr/sbin/uhttpd -f -h /www -r Gargoyle -x /cgi-bin
1407 root 1576 S /usr/sbin/hostapd -P /var/run/wifi-phy0.pid -B /var/
1882 nobody 920 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf -k
1989 root 1360 R ps
-----------------
can you help me please? i don't understand why the service is disappeared
would you tell me ? this is an error or normal. I thought that at least one qos service must be loaded in the active list of ps command.

thank you in advance
tungnk

Could you post a screenshot of your

Gargoyle - Firewall - QOS (Download) Classification Rules
and
Gargoyle - Firewall - QOS (Download) Service Classes

Thank you for your quick answer
hier is my classification rules



and QoS service class




as i try to enter: /etc/init.d/bwmon_gargoyle start
terminal shows as follow

root@Gargoyle:/# /etc/init.d/bwmon_gargoyle start
ipset v6.20.1: Syntax error: cannot parse /31: resolving to IPv4 address failed
touch: /etc/crontabs/root: No space left on device
grep: /etc/crontabs/root: No such file or directory
md5sum: can't open '/etc/crontabs/root': No such file or directory
mv: can't create '/etc/crontabs/root': No space left on device

thank you in advance

tungnk

In the Download Direction the Source is an IP address on the Internet and the Destination is a private IP address on your LAN.

You have source and destination around he wrong way in:
Gargoyle - Firewall - QoS (Download) - QoS(Download) Classification Rules

A lot of those errors indicate you're out of flash space which could cause all sorts of unexpected/unwanted behaviour.