Gargoyle Forum

Okay i would buy

TP-Link 300 Mbps Wireless N Router (TL-WR841N)
CAN GARGOYLE WORK IN IT? PLEASE CONFIRM
from >>http://www.snapdeal.com/product/tplink- ... ter/640560


and for gargoyal to work i believe i need this file PLEASE CONFIRM

gargoyle_1.8.0-ar71xx-generic-tl-wr841n-v8-squashfs-factory.bin

from download page


Select Your Download

Download: Firmware images
Architecture: Atheros AR71XX
Branch: 1.8(stable)
Version: 1.8.0

Am i right???

And here is what i want to do with it


I have only 7 device to connect and want to monitor their network traffic.

1.their address reservation

2.Mac filter

3.their bandwidth usage

4.and their speed

5.and I want to dissconnet them if they cross a certain limit automatically


please someone confirm

http://wiki.openwrt.org/toh/tp-link/tl-wr841nd

Not v10 or v11
Don't ask me how to tell the version I have no idea. You'd have to ask the store.


Ideally you'd buy a v8 so that it matches the firmware you listed.

By the way, all of these posts could remain in the one thread. They're all on the same topic in general.

Lantis wrote:http://wiki.openwrt.org/toh/tp-link/tl-wr841nd

Not v10 or v11
Don't ask me how to tell the version I have no idea. You'd have to ask the store.


Ideally you'd buy a v8 so that it matches the firmware you listed.

By the way, all of these posts could remain in the one thread. They're all on the same topic in general.

Okay thanks

Now i got understand full story

Thank you sir!
CHEERS......