Gargoyle Forum

Hi,

I've flashed my TPLINK MR3420 v2 (PL) with Gargoyle 1.8.0, I'm using a huawei E3372 modem (non-hilink).

While the UI was spiffy, it lacked the '3g/4g' configuration panel. It was simply missing from the main settings.

Note, Gargoyle 1.6.2.2 works on my router, connects, but the DHCPed computers have no network access at all. Couldn't find anything worthwhile in the logs.

Finally, the modem works sort of well on original TPLINK roms, to which I've reverted.

Any idea what might be wrong with 1.8 ?

Thanks!

Thanks for your post

nestor wrote:I've flashed my TPLINK MR3420 v2 (PL) with Gargoyle 1.8.0, I'm using a huawei E3372 modem (non-hilink). While the UI was spiffy, it lacked the '3g/4g' configuration panel. It was simply missing from the main settings.

I have used a 3G Huawei E160E with a TL-WDR3600 running Gargoyle 1.8.0 and it ran OK - but only 3G so I have never had the privilege of seeing the '3g/4g' configuration panel

nestor wrote:Note, Gargoyle 1.6.2.2 works on my router, connects, but the DHCPed computers have no network access at all.

I also ran Gargoyle 1.6.2 for some time and I would be looking carefully in the firewall section (ie restrictions, quotas, qos) for some misconfiguration that was blocking the Internet access for the DHCP machines.