Archer C7 v2.0 cpu speed
Posted: Thu Aug 27, 2015 4:23 pm
Finally, I got my new Archer C7 and flashed gargoyle firmware on it. but the processor seems under power, it's only showing 358 Mhz.
Does this mean that this processor cannot handle the load in the future, please advise.
system type : Qualcomm Atheros QCA9558 rev 0
machine : TP-LINK Archer C7
processor : 0
cpu model : MIPS 74Kc V5.0
BogoMIPS : 358.80
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x0ff8, 0x0ff8, 0x0ff8]
isa : mips1 mips2 mips32r1 mips32r2
ASEs implemented : mips16 dsp dsp2
shadow register sets : 1
kscratch registers : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available
Thanks
Does this mean that this processor cannot handle the load in the future, please advise.
system type : Qualcomm Atheros QCA9558 rev 0
machine : TP-LINK Archer C7
processor : 0
cpu model : MIPS 74Kc V5.0
BogoMIPS : 358.80
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x0ff8, 0x0ff8, 0x0ff8]
isa : mips1 mips2 mips32r1 mips32r2
ASEs implemented : mips16 dsp dsp2
shadow register sets : 1
kscratch registers : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available
Thanks