Page 1 of 1
WR841nd v9.0
Posted: Mon Jul 13, 2015 9:36 pm
by ddoimo1992
Hello,
I tried to search in the forum for an answer about the WR841nd v9 compatibility, has anyone get success flashing the file gargoyle_1.7.1-ar71xx-generic-tl-wr841n-v9-squashfs-factory.bin on this model?
The WR841nd v9 have the Atheros QCA9533 and the file is for AR71xx, can i flash it anyway?
Thanks!!!
Re: WR841nd v9.0
Posted: Wed Jul 22, 2015 5:29 am
by pepsi82
today i have upgrade from 1.7.1 with this file
gargoyle_1.7.2-ar71xx-generic-tl-wr841n-v9-squashfs-factory.bin
all OK
bye
Re: WR841nd v9.0
Posted: Thu Sep 03, 2015 6:12 am
by pepsi82
anyone upgrade to 1.8.0 ???
Re: WR841nd v9.0
Posted: Fri Sep 04, 2015 8:28 am
by JasonB11
I have and I am having issues with changing settings after the initial installation is complete. After making changes to (example: change SSID name | change reboot times) the settings look like they have changed. But when refreshing the browser the settings revert back to what was originally entered.
If anyone has any suggestions how to fix this I would be very grateful. Also, I am having issues with the software becoming "undefined" with all settings after a backup/restore. Any help with this would be greatly appreciated too.
tp link- 841nd v 9.2
Re: WR841nd v9.0
Posted: Fri Sep 04, 2015 4:46 pm
by nworbnhoj
JasonB11 wrote:I have and I am having issues with changing settings after the initial installation is complete. After making changes to (example: change SSID name | change reboot times) the settings look like they have changed. But when refreshing the browser the settings revert back to what was originally entered. Also, I am having issues with the software becoming "undefined" with all settings after a backup/restore. tp link- 841nd v 9.2
Just guessing - but to me this looks like the bare min Flash/RAM in the WR841 is struggling with Gargoyle v8.0. or you got a bad Flash. If it were mine I would checksum the Gargoyle image (or redownload) and reflash. If still no luck I would go back to gargoyle 1.6.2.
Re: WR841nd v9.0
Posted: Wed Sep 09, 2015 10:24 am
by JasonB11
nworbnhoj wrote:
Just guessing - but to me this looks like the bare min Flash/RAM in the WR841 is struggling with Gargoyle v8.0. or you got a bad Flash. If it were mine I would checksum the Gargoyle image (or redownload) and reflash. If still no luck I would go back to gargoyle 1.6.2.
I think that was probably the issue. I just reflashed the device and started fresh. I am not going to download anything extra onto the router. Just the basic settings and that's it.
Re: WR841nd v9.0
Posted: Thu Sep 17, 2015 9:32 am
by pepsi82
flash 1.8 on wr841nd v9
ALL OK
ALL WORK