Gargoyle Forum

Hi There

I've recently changed my old TP-Link 1043nd v1 to 1043nd v2. On both I have installed Gargoyle 1.6.2. I have big issue with Lan speeds. Lan connections between it's Lan ports are extremly slow (approximately 300KB/s). When I have 2 pc's connected to gigabit switch connected also to 1043nd v2, I have transfers like 60MB/s, but connecting one pc directly to router slower the transfer as I wrote ealier.
I've checked/changed cables/computers without effect. Downloading file from one of this pc's to wifi(n) connected device gives speed 5MB/s. When the speed reaches about 8MB/s suddenly decreases.

What can be the reason?

Don't know if it has something to do, but I'm using exroot

Hi sounds verry strange!
Try and flash the latest ver of 1.7
viewtopic.php?f=14&t=7227

If that dont work then try and flash back to stock latest ver and than back to 1.7

Ok, so I finally found a solution. The cable between router and switch was broken. "Unfortunatelly" when I connected my old router witch switch it worked correctly so the cable was no suspected by me, but finally I decided to connect new rpiter with another cable and everything started to work correctly I only add that meanwhile I tested also v1.7.1 but not working exroot function is blocker for me, but latest version is quite interesting to try.

Thank's for your help!