Gargoyle Forum

First sorry for poor English, my main language is Portuguese. What is the possibility of support for Buffalo WZR-600DHP2 router? I am completely newbie, but I found these two links that may help to develop.

https://downloads.openwrt.org/snapshots ... x/generic/
http://www57.atwiki.jp/ddwrt_openwrt/pages/38.html (In Japanese but it is understood using Google Translator)

I think the trunk builds can also be used in the development to other Buffalo, Asus and Netgear models.

I'm now using DD-WRT on WZR-600DHP2, but I'm Gargoyle firmware enthusiast. I've used for many years in the old TP-Link WR1043ND. Thank you very much.

The Buffalo WZR-600DHP with original firmware can be flashed with:

gargoyle_1.7.1-ar71xx-generic-wzr-600dhp-squashfs-factory.bin

from the Gargoyle Download page.

However you have a Buffalo WZR-600DHP2

The OpenWrt page for the Buffalo WZR-600DHP mentions the Version/Model C0B2 - I wonder if this is what you have???

http://wiki.openwrt.org/toh/buffalo/wzr-600dhp

Thanks for reply @nworbnhoj. Answer is no. Different models.

WZR-600DHP:
CPU - Atheros AR7161@680MHz
Ram - 128MiB
Flash - 32MiB

WZR-600DHP2 (my router):
CPU - Broadcom BCM47081A0@800MHz
Ram - 256 MiB
Flash - 128 MiB
Link on OpenWRT - http://wiki.openwrt.org/toh/buffalo/wzr-600dhp2

Gargoyle Support comes at some point after OpenWrt support.

There does not appear to be any recent progress towards OpenWrt support
http://wiki.openwrt.org/toh/buffalo/wzr-600dhp2
https://forum.openwrt.org/viewtopic.php?id=47372

So no time soon I would guess

^ agree with the above post.

That being said, there seems to be DD-WRT support for it. Buffalo just posted (6/30/15) a DD-WRT ugprade file/instructions in the download tab. (there's two firmwares, regular and professional (DD-WRT)):
http://www.buffalo-technology.com/en/pr ... dual-band/

Thanks guys