Page 1 of 1
OpenVPN problem
Posted: Sun Jun 28, 2015 10:32 am
by gipsonTHEone
Hi
I have TP-Link TL-WDR4300 v1 with Gargoyle Version:1.7.1.
I try to run OpenVPN that the clinet opvn can see devices in local LAN.
Seems to be easy - couse i start server on router - check "allow clients to access hosts on Lan", create clients, download all certs and keys.
All certs and keys put in OpenVPN program install on my PC and even more my PC contect to VPN.
The problem is that i can`t see any device in local LAN. I can only ping/ eneter to router but i cant connected to other PC/ devices.
Has onyone idea what i should add (and where)?
Re: OpenVPN problem
Posted: Sun Jun 28, 2015 5:35 pm
by nworbnhoj
By chance, do you have Gargoyle - Connection - Wireless - Wireless Client Isolation Enabled ?
Re: OpenVPN problem
Posted: Mon Jun 29, 2015 5:39 am
by gipsonTHEone
nworbnhoj wrote:By chance, do you have Gargoyle - Connection - Wireless - Wireless Client Isolation Enabled ?
Hi
no i have this option disabled.
should be enabled ?
Re: OpenVPN problem
Posted: Mon Jun 29, 2015 7:03 am
by nworbnhoj
gipsonTHEone wrote:should be enabled ?
I think that you should disable Wireless Client Isolation.
Sorry, but I do not know the solution to your VPN problem.
Re: OpenVPN problem
Posted: Thu Jul 02, 2015 1:24 am
by gshlomi
Got the same problem.
Any help would be appriciated
TL-WR1043ND V2, Gargoyle 1.7.1
Re: OpenVPN problem
Posted: Mon Jul 06, 2015 3:26 am
by gipsonTHEone
gshlomi wrote:Got the same problem.
Any help would be appriciated
TL-WR1043ND V2, Gargoyle 1.7.1
So seems to be software problem/bug.
i found another problem. In firewall option forward ports.
router open port but not forwarding - i think. I use synology and i want to have access, so forward 5000 port to Synology IP. In orginal stock TP LINK software works perfectly, in gargoyle not. I check in port scaner - port is open but still i can`t connect to snology.
in free time a try another software in my router
Re: OpenVPN problem
Posted: Mon Jul 06, 2015 3:34 pm
by nworbnhoj
I think that there is something else going on here - because other people are using the VPN and port forwarding functions successfully! I do not personally use VPN but I certainly forward ports without a problem.
Perhaps you could post screen shots of your VPN setting page, port forward settings and status page - and someone here might be able to spot a config issue.
Re: OpenVPN problem
Posted: Mon Jul 13, 2015 4:21 am
by gipsonTHEone
nworbnhoj wrote:I think that there is something else going on here - because other people are using the VPN and port forwarding functions successfully! I do not personally use VPN but I certainly forward ports without a problem.
Perhaps you could post screen shots of your VPN setting page, port forward settings and status page - and someone here might be able to spot a config issue.
Hi
Now i use VPN via Synogloy. But still i have problem to connect to synology via Intetrnet (DSM works on port 5000) . As i wrote did`t work port forwarding.
I have the same config in stock TPLINK firmware and works.
Re: OpenVPN problem
Posted: Sat Aug 01, 2015 4:58 pm
by nworbnhoj
Just a thought - have you verified that 192.168.10.101 is accepting connections on these ports? (ie from a LAN address)
Re: OpenVPN problem
Posted: Sat Aug 01, 2015 10:08 pm
by ispyisail
I use openVPN
a lot of information is missing from this post
You don't need to use port forward
screen shot of your VPN config page please
Usually subnet needs to be different at both ends e.g.
192.168.10.x
192.168.1.x
What client are you using? version?
router to router??
PC to router?
What OS?