Gargoyle Forum

I found this workaround on dd-wrt forums http://www.dd-wrt.com/wiki/index.php/OM1P_config

But I need to find out any suggestions to adapt it to get gargoyle on these routers.

Thanks

http://www.gargoyle-router.com/phpbb/vi ... p?f=8&t=92

See this thread from way back when

Doesn't look like anyone was successful yet.

Not sure if OpenWRT is supported on the OM1P yet?

-----------------------------

Edit: Check this thread out:

http://walkyr.fr/flasher-une-borne-wifi ... nera-2200/

You MIGHT be able to get it working with the latest 1.2.3 version

Google searches have said that the reboots are caused
by the Watchdog thing built into the OM1P's - so it may/may not
work properly - only way to try is test it out.

No luck yet. The watchdog is the issue. There is a script that needs to be included.

http://robin-mesh.wik.is/Howto/OM1P_Ope ... e_Watchdog

But not sure how to accomplish it in Gargoyle.

I believe you can telnet into the router and perform those
commands through putty.

Looks like all that does is disable the watchdog function so that
it doesn't interfere with the router and cause the reboots.

Since it is so device specific, not sure if Eric would add that
in there just for the 1 type of router.