Network Printer
Posted: Sat Feb 21, 2015 6:49 am
Hi, I have 2 subnets: 192.168.1.x & 192.168.2.x
My router (with gargoyle) is 192.168.1.1
Both subnets are connected using same switch & router
I have a network printer at 192.168.2.3
Is there a way to configure gargoyle so that the pc's in 192.168.1.x can use the network printer (192.168.2.3)
Any help would be appreciated
My router (with gargoyle) is 192.168.1.1
Both subnets are connected using same switch & router
I have a network printer at 192.168.2.3
Is there a way to configure gargoyle so that the pc's in 192.168.1.x can use the network printer (192.168.2.3)
Any help would be appreciated