Gargoyle Forum

"Resetting...

U-Boot 1.1.4 (Mar 19 2014 - 11:06:29)

AP83 (ar9100) U-boot 0.0.11
DRAM:
sri
32 MB
id read 0x100000ff
flash size 8MB, sector count = 128
Flash: 8 MB
Using default environment

In: serial
Out: serial
Err: serial
Net: ag7100_enet_initialize...
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
eth0 up
eth0
is_auto_upload_firmware=0
Autobooting in 1 seconds## Booting imagebootm at bf020000 ...
Uncompressing Kernel Image ... Error: Bad gzipped data
GUNZIP ERROR - must RESET board to recover."

jtag
tpl (copy/paste)
erase(d) 0xbf020000 +7c0000
static IP changed to 192.168.0.5
uploaded with tftp2
cp.b help 0xbf020000 0x7c0000
bootm 0xbf020000
tryied images with/without bootloader

nothing helps, what can i do next ?

everything is here

http://wiki.openwrt.org/toh/tp-link/tl-wr1043nd

ispyisail wrote:everything is here

http://wiki.openwrt.org/toh/tp-link/tl-wr1043nd

I know that, thank you !!!

Topic moved here:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=278684
Still waiting for answers...

vlad.theodor wrote:

Topic moved here:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=278684

Search for:
1) "wr1043nv1_tp_recovery.bin" ( http://www.dd-wrt.com/phpBB2/download.php?id=31148 )
2) Tftpd32 ( http://tftpd32.jounin.net/tftpd32_download.html )
3) Download archive from http://www.dd-wrt.com/phpBB2/download.php?id=29248
4) Use a UTP-cable ("no jtag"-style)
5) Read archive and PUT YOUR LAN CABLE IN THE LAN (yellow) PORT (NOT IN WAN)!!!
6) Change your computer ip in 192.168.0.66 and subnet mask in 255.255.255.0
7) Set Tftpd32 ready for upload
8) Router - power off, power on then quick pressed the 30/30/30-button till the "sevice-led" blinked fast

and Tftpd32 will autoupload your recovery-image then router will self-reboot like new.
Reset your computer IP to auto/dhcp and login in router at 192.168.1.1

Found my old router. I tryed to upgrade with Gargoyle, bricked again.

Renamed IP adress in 192.168.0.66
Subnet mask 255.255.255.0
Default gateway 192.168.0.1

Good working again with Tftpd32 and files renamed in "wr1043nv1_tp_recovery.bin" (was the only acceptable way to read requests and upload in Tftpd.
Unplug power-supply. Copy first the bin-file in the Tftpd director (in Windows Program Files tree or WPF for x86). Using only the "Tftp server" - go to "Show Dir", select the bin-file then press "copy", then "close". Insert screwdriver/else in the 30/30/30 hole, hold pressing then reconnect power, is a bit strange to work with both hands, i know. You will show the upload/flash process, relax, release the screwdriver and let the router reboot by himself. Done.

The only working firmware with TL-WR1043ND v.1 was this https://archive.openwrt.org/attitude_ad ... x/generic/
(Openwrt "attitude_adjustment" 12.09 - only in archives!)

and a copy of "wr1043nv1_tp_recovery.bin: TTFT Recovery" here https://github.com/edgardmessias/dd-wrt-wr1043ndv1

I don't know why can't upload/flash the original firmware from TL-WR1043ND v.1 or Gargoyle again. Not even if i do this in the working image (described at top). Tryed to rename to a shorther name, not working. Had a stripped version too, was installed but can't login, known users and pass won't work.