Page 2 of 4
Re: Gargoyle-ispy 2015-January-10.7z
Posted: Sat Jan 10, 2015 7:12 pm
by sergi
gargoyle_1.7.x-ar71xx-generic-tl-wr1043nd-v2 firmware only
http://goo.gl/wGPq3O
Re: Gargoyle-ispy 2015-January-10.7z
Posted: Sat Jan 10, 2015 8:02 pm
by nworbnhoj
thank you sregi
much appreciated.
I have loaded this version onto TP-Link TL-WR1043N/ND v2 and successfully configured a Huawei E160E modem plugged into the USB port. ie the 3G (GSM) option is available and functional in this version.
I will build up the remainder of my config and test.
Re: Gargoyle-ispy 2015-January-10.7z
Posted: Sat Jan 10, 2015 11:07 pm
by nworbnhoj
This version loaded successfully and resolved the issue with the missing 3G (GSM) option.
Device Name:Gargoyle
Gargoyle Version:1.7.X (Built 20150109-0720 git@da35789)
Model:TP-Link TL-WR1043N/ND v2
Device Configuration:Gateway
Memory Usage:17.4MB / 60MB (29%)
Connections:174/4096
CPU Load Averages:0.12 / 0.13 / 0.13 (1/5/15 minutes)
My configuration/testing touched on the following features:
- 3G (GSM) WAN connection with Huawei E160E modem
- DHCP - Static IP's
- Quota's with IP ranges
- QOS upload & download
- Plugins - logread & TOR (see below)
- Backup/Restore
- Update Firmware (able to roll back to 1.6.2)
I was unable to load the TOR plugin. I have had a very similar problem with 1.6.2
http://www.gargoyle-router.com/phpbb/vi ... f=6&t=6428 However, this time a failsafe reset made no difference.
Re: Gargoyle-ispy 2015-January-10.7z
Posted: Sun Jan 11, 2015 3:25 pm
by Garg_Fan
Hi, I bricked my router with this update. It's TP-Link WR1043ND-V1, I succesfully upgraded to 1.7.0 and tried this update with preserve settings enabled. I used the file gargoyle_1.7.x-ar71xx-generic-tl-wr1043nd-v1-squashfs-sysupgrade.bin. After the upgrade there was reboot and my tp-link doesn't startup anymore. Anything I can do now ?
Re: Gargoyle-ispy 2015-January-10.7z
Posted: Sun Jan 11, 2015 3:55 pm
by ispyisail
Garg_Fan wrote:Hi, I bricked my router with this update. It's TP-Link WR1043ND-V1, I succesfully upgraded to 1.7.0 and tried this update with preserve settings enabled. I used the file gargoyle_1.7.x-ar71xx-generic-tl-wr1043nd-v1-squashfs-sysupgrade.bin. After the upgrade there was reboot and my tp-link doesn't startup anymore. Anything I can do now ?
google "openwrt failsafe"
Re: Gargoyle-ispy 2015-January-10.7z
Posted: Sun Jan 11, 2015 5:22 pm
by Garg_Fan
No luck. I even tried recvdupd.exe with udp sniffing. The LED's are working - PWR ON and every port I put the cable in. SYS LED is OFF.
telnet 192.168.1.1 doesn't work
Re: Gargoyle-ispy 2015-January-10.7z
Posted: Sun Jan 11, 2015 6:15 pm
by ispyisail
fix your IP
while booting your router
Re: Gargoyle-ispy 2015-January-10.7z
Posted: Sun Jan 11, 2015 7:17 pm
by mgoo
Being unable to use either link, I wondered if you have considered bittorrent as a third download alternative, for providing a more platform agnostic means of distribution for your testing releases?
-mgoo
Re: Gargoyle-ispy 2015-January-10.7z
Posted: Sun Jan 11, 2015 8:15 pm
by ispyisail
mgoo wrote:
Being unable to use either link, I wondered if you have considered bittorrent as a third download alternative, for providing a more platform agnostic means of distribution for your testing releases?
-mgoo
I did indeed think about that
Gargoyle needs a bittorrent server/client
Re: Gargoyle-ispy 2015-January-10.7z
Posted: Sun Jan 11, 2015 11:03 pm
by wallacefung
Hello I am a new Gargoyle user but I am using this latest build already.
I found that if I add new port range forward rule, it can save it occasionally.
The worst case is all port rules deleted after I press save button.
I am using Firefox 34.0.5 to config it.