Having trouble with port forwarding for DDNS
Posted: Sat Oct 18, 2014 11:37 am
I have two routers at home. A Speedport W 724V and a TP-Link WDR4300 with gargoyle 1.6.2 installed on it. I want to use my ddns for accessing the router and a nas remotely. I have set the ddns connection and opened the ports also nat pnp and upnp is enabled but I can't reach the router on the remote port.
In Speedport DHCP address reservation is enabled for the WDR4300.
With the stock firmware I was able to use ddns and I could reach the web ui of the speedport router but now I can't do it and transmission says its port is closed.
Thank you!
Up:
All settings was good, it was the Speedport's fault. The interesting thing is that I have changed only the adress lease time from 1 day to the maximum (3 weeks) and now the ddns is working. I think it's weird.
In Speedport DHCP address reservation is enabled for the WDR4300.
With the stock firmware I was able to use ddns and I could reach the web ui of the speedport router but now I can't do it and transmission says its port is closed.
Thank you!
Up:
All settings was good, it was the Speedport's fault. The interesting thing is that I have changed only the adress lease time from 1 day to the maximum (3 weeks) and now the ddns is working. I think it's weird.