Gargoyle Forum

Posted: **Thu Aug 28, 2014 10:35 am**

Hi all,

today i tried first time Gargoyle firmware, currently have only one problem with it.
FW: gargoyle_1.6.2-ar71xx-generic-tl-wr1043nd-v1-squashfs-factory.bin

Wireless-N working at 130mbs only. on stock firmware i had 300 this morning.

my current config:

Code: Select all

config wifi-device 'radio0'
        option type 'mac80211'
        option hwmode '11ng'
        option macaddr 'hidden'
        list ht_capab 'SHORT-GI-40'
        list ht_capab 'DSSS_CCK-40'
        option txpower '20'
        option noscan '1'
        option htmode 'HT40-'
        option channel '9'

config wifi-iface 'ap_g'
        option device 'radio0'
        option mode 'ap'
        option network 'lan'
        option disassoc_low_ack '0'
        option ssid 'zone'
        option encryption 'psk2'
        option key 'hidden'

noscan is not removed when i change channels in GUY.
I do have now two channels 9+13, but connection is still130mbps.
i do have tens of another AP's here, but no one of them using this channels.

my wifi nic is Intel centrion n 2200

thank's for help

Posted: **Thu Aug 28, 2014 5:32 pm**

Hi were are you getting that reading from? readings like that are not always rite. try copying a file across the network to see how fast it really is.

Posted: **Thu Aug 28, 2014 5:40 pm**

tapper wrote:Hi were are you getting that reading from? readings like that are not always rite. try copying a file across the network to see how fast it really is.

Hi,

fie copy is also slow than normal.
i get 7MB/s
with tp-link FW i had 10-11MB/s

with 1gb file

Posted: **Fri Aug 29, 2014 3:42 am**

I just ran some tests and the top speed i can get over WiFi is 150 mbps. most of the time it hovers at 135 mbps tho dont no what's up.

Gargoyle Forum

1043nd and 130mbps another problem

1043nd and 130mbps another problem

Re: 1043nd and 130mbps another problem

Re: 1043nd and 130mbps another problem

Re: 1043nd and 130mbps another problem