Gargoyle Forum

I have a problem with port forvarding.
When my router have power troubles (sudden power off), it forgets all forwards.
All other settings still OK. Only port forwarding have a trouble.
My environment:
Gargoyle Version:1.6.1
Model:TP-Link TL-WR1043N/ND v1
Device Configuration:Gateway
Forvard-table have about 8-10 rows (usually 6-7 active + 3-4 disabled).

Thanks for nice product!

I localise the problem.
Not all ports are lost.
That condition for losses:
1. Prescribe port forwarding
2. Make it inactive
3. Enable UPnP & NAT-PMP service
4. Wait until the port appears in the list UPNP (it is better to take the port here for the first step)
5. Power off the router
6. Turn on the power.
After booting - our port disappears from the port forwarding table.