Page 1 of 1
DHCP Server - cannot disable on v1.2
Posted: Sun Mar 28, 2010 11:42 pm
by mdcoll25
I have the new version , as at 18th March 2010.
After installing , I cannot disable the built in DHCP server.
Also - The new .img file does not work after a reboot. Unit is stuck at Redboot.
Installation is successful with the squash/vlmz combination ok.
Reverting to v1.18 is OK on the DHCP problem.
I suspect this is a bug.
Cheers
Mike
Re: DHCP Server - cannot disable on v1.2
Posted: Mon Mar 29, 2010 12:53 am
by DoesItMatter
How did you upgrade the new image file?
I had 1.2.0 already loaded, and downloaded 1.2.1 combined image
Flashed it from the Web GUI, but left it for about 30 minutes,
came back, power-cycled the router, and 1.2.1 was loaded fine.
Atheros devices always take a long time to flash.
I'm going to re-load 1.2.1 here again, and see if I can disable the
DHCP server and will respond back.
Re: DHCP Server - cannot disable on v1.2
Posted: Mon Mar 29, 2010 2:21 am
by DoesItMatter
Are you getting this error?
I tried to un-check the DHCP box, and I get the error shown
in the attached image when I hit apply settings.
Re: DHCP Server - cannot disable on v1.2
Posted: Mon Mar 29, 2010 5:28 am
by mdcoll25
Yup , that's exactly what I get
Re: DHCP Server - cannot disable on v1.2
Posted: Mon Mar 29, 2010 5:34 am
by der_Kief
Exact same problem here.
der_Kief
Re: DHCP Server - cannot disable on v1.2
Posted: Mon Mar 29, 2010 8:30 am
by Eric
Thanks for reporting this -- I'm working on the problem now.