Page 1 of 2
Gargoyle-ispy 2014-April-18.7z
Posted: Thu Apr 17, 2014 3:41 pm
by ispyisail
USE AT YOUR OWN RISK
Gargoyle-ispy 2014-April-18.7z
http://goo.gl/jbGZZF
i18n/German/openvpn: add new translated text for commit f9f379f "implement button to clear all existing OpenVPN keys"
i18n/polish/openvpn: add translation
Add translation to openvpn
Re: Gargoyle-ispy 2014-April-18.7z
Posted: Thu Apr 17, 2014 7:32 pm
by Garghoul
Mmmh, just wondering, where/how would I switch the language from the default English to f.e. French, Italian, Dutch or German in the first place?
Can't find anything in any of the 'System' options nor anything describing the procedure in the Gargoyle Documentation Wiki.
Re: Gargoyle-ispy 2014-April-18.7z
Posted: Thu Apr 17, 2014 7:52 pm
by ispyisail
I only use english myself but I understand with gargoyle you select your language at install time
Re: Gargoyle-ispy 2014-April-18.7z
Posted: Thu Apr 17, 2014 10:08 pm
by Garghoul
Ahhh, I see. So no quick and easy way to do it on the fly at any later time. What a pity.
Re: Gargoyle-ispy 2014-April-18.7z
Posted: Fri Apr 18, 2014 3:08 am
by ispyisail
Code: Select all
------------------------------------------------------------------
| _____ _ |
| | __ \ | | |
| | | \/ __ _ _ __ __ _ ___ _ _| | ___ |
| | | __ / _` | '__/ _` |/ _ \| | | | |/ _ \ |
| | |_\ \ (_| | | | (_| | (_) | |_| | | __/ |
| \____/\__,_|_| \__, |\___/ \__, |_|\___| |
| __/ | __/ | |
| |___/ |___/ |
| |
|----------------------------------------------------------------|
| Gargoyle version 1.6.X | OpenWrt Attitude Adjustment branch |
| Gargoyle revision 87ce626 | OpenWrt revision r40431 |
| Built April 17, 2014 | Target ar71xx/routerstation |
------------------------------------------------------------------
root@Gargoyle:~#
Re: Gargoyle-ispy 2014-April-18.7z
Posted: Fri Apr 18, 2014 4:16 pm
by kingbeowulf
So far so good: Netgear WNDR3700 v1
Code: Select all
# cat /proc/cpuinfo
system type : Atheros AR7161 rev 2
machine : NETGEAR WNDR3700/WNDR3800/WNDRMAC
processor : 0
cpu model : MIPS 24Kc V7.4
BogoMIPS : 452.19
wait instruction : yes
microsecond timers : yes
tlb_entries : 16
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x0ff8, 0x0ff8, 0x0ff8]
ASEs implemented : mips16
shadow register sets : 1
kscratch registers : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available
Code: Select all
------------------------------------------------------------------
| _____ _ |
| | __ \ | | |
| | | \/ __ _ _ __ __ _ ___ _ _| | ___ |
| | | __ / _` | '__/ _` |/ _ \| | | | |/ _ \ |
| | |_\ \ (_| | | | (_| | (_) | |_| | | __/ |
| \____/\__,_|_| \__, |\___/ \__, |_|\___| |
| __/ | __/ | |
| |___/ |___/ |
| |
|----------------------------------------------------------------|
| Gargoyle version 1.6.X | OpenWrt Attitude Adjustment branch |
| Gargoyle revision 87ce626 | OpenWrt revision r40431 |
| Built April 17, 2014 | Target ar71xx/usb |
------------------------------------------------------------------
Re: Gargoyle-ispy 2014-April-18.7z
Posted: Sat Apr 19, 2014 4:33 am
by netweaver
Just installed in a buffalo HP 450. All fine so far.
Thanks for all intermediate builds.
Re: Gargoyle-ispy 2014-April-18.7z
Posted: Sat Apr 19, 2014 2:35 pm
by tapper
seems like you pissed off dropbox again hahaha cna you put up a new link pleas?
Re: Gargoyle-ispy 2014-April-18.7z
Posted: Sat Apr 19, 2014 2:37 pm
by dieselz
the link went down since yesterday for me while downloading at 83% Q_Q
too much traffic when i am almost done, is there a chance you can post a mirror.
and THANK YOU for all your hard work really <3333
Re: Gargoyle-ispy 2014-April-18.7z
Posted: Sat Apr 19, 2014 8:29 pm
by ispyisail
for those that are interested
My Routerstation Pro work well with this firmware
My TP-link TL-WR1043ND has been bricked, I need to recover it.
Im hoping this patch fix's the problem
something weird happens when building alix target -- build fails on grub configure, but works if debug lines are added to Host/Configure of grub. This is the second time I'm adding a patch to this file because of a build error, not sure exactly what's going on here, but hope this serves as a stop-gap measure
I've built the image and are in the process of uploading it. Its a bit involved when im not using dropbox