Gargoyle rules missing after /etc/init.d/firewall restart
Posted: Sun Feb 23, 2014 12:05 am
Gargoyle iptables rules are lost after a '/etc/init.d/firewall restart'.
All its ingress/egress rules are missing and return only after I do a full reboot.
Any workaround beside doing a full reboot?
Gargoyle version:
All its ingress/egress rules are missing and return only after I do a full reboot.
Any workaround beside doing a full reboot?
Code: Select all
root@Gargoyle:/etc# /etc/init.d/firewall restart
* Flushing IPv4 filter table
* Flushing IPv4 nat table
* Flushing IPv4 mangle table
* Flushing IPv4 raw table
* Flushing conntrack table ...
* Populating IPv4 filter table
* Zone 'lan'
* Zone 'wan'
* Rule 'Allow-DHCP-Renew'
* Rule 'Allow-Ping'
* Forward 'lan' -> 'wan'
* Populating IPv4 nat table
* Zone 'lan'
* Zone 'wan'
* Populating IPv4 mangle table
* Zone 'lan'
* Zone 'wan'
* Populating IPv4 raw table
* Zone 'lan'
* Zone 'wan'
* Set tcp_ecn to off
* Set tcp_syncookies to on
* Set tcp_window_scaling to on
* Running script '/etc/firewall.user'
* Running script '/usr/lib/gargoyle_firewall_util/gargoyle_additions.firewall'
* Running script '/etc/openvpn.firewall'
* Running script '/usr/share/miniupnpd/firewall.include'
Gargoyle version:
Code: Select all
|----------------------------------------------------------------|
| Gargoyle version 1.5.X | OpenWrt Attitude Adjustment branch |
| Gargoyle revision 67edfb1 | OpenWrt revision r38347 |
| Built leden 12, 2014 | Target ar71xx/usb |
------------------------------------------------------------------