Gargoyle Forum

My custom builds on google drive 1.6.0-ar71xx-AA_backports-r39392

The builds are done against the target ar71xx Openwrt Attitude Adjustment Revision 39408 with additional backported devices.The Gargoyle version is 1.6.0 and the images are compatible with the current gargoyle package repo.

Factory images gargoyle:

• TL-WA850re-v1
• TL-WA750re-v1
• TL-WA801nd-v1
• TL-WA801nd-v2
• TL-WA901nd-v3
• TL-WR842nd-v2
• TL-MR10u-v1
• TL-MR11u-v1
• TL-MR11u-v2
• TL-MR13u-v1
• TL-MR3020-v1
• TL-MR3040-v1
• TL-MR3040-v2
• TL-MR3420-v1
• TL-MR3420-v2

Images are tested, but the risk is yours.

Thank you.

I have TL-MR3420-v2. It works.
But there is not enough free space to install all reqired packages for extroot.

How to build "extroot possible" image?
Can you ?

hello

it will be a possible for the TL-WA701nd-v2 ?

Will be awesome

FriedZombie wrote:Factory images gargoyle:
[*]TL-WA801nd-v1[/*]
Images are tested, but the risk is yours.

I was presented with a gift = spoiled the wrong firmware device TL-WA801nd-v1

flashed firmware gargoyle_1.6.0-ar71xx-generic-tl-wa801nd-v1-squashfs-factory.bin

the device is working properly, but while looking for the firmware I found USB port pins. They not soldered to the motherboard, bat easy to solder the wires to them and USB connector.

Firmware gargoyle_1.6.0-ar71xx-generic-tl-wa801nd-v1-squashfs-factory.bin (for Flash 4MiB and Ram 32MiB)

as here http://www.gargoyle-router.com/wiki/doku.php?id=3g written

• To be able to use a 3g with Gargoyle
  Your Gargoyle router must have a free USB port.
  You need 3g/UMTS USB Dongle
  An active account with you 3g provider
  Routers with at least 8MB of Flash and 32MB of RAM.

But many users change Flash chip at 16 MB: MX25L12805 or S25FL128PIF

I can buy a chip flash memory (MX25L12805 or S25FL128PIF) and programmed by the programming device.

Is it possible to compile the firmware for TL-WA801nd-v1 with support USB and flash 16 MB?

Have someone flashed the WR842ND V2 ??

I'm very frustrated with the stock firmware media server limitation the number of files scaned.

I can't scan all the files in my 500GB USB HDD
It's a shame it's not advertised, had I known of this limitation I had not bought this router.

derek wrote:Have someone flashed the WR842ND V2 ??

I'm very frustrated with the stock firmware media server limitation the number of files scaned.

I can't scan all the files in my 500GB USB HDD
It's a shame it's not advertised, had I known of this limitation I had not bought this router.

Latest build here:
viewtopic.php?f=14&t=6991

Thanks!!

Do you know if gargoyle firmware can manage the file number limitation for the media server?

derek wrote:Thanks!!

Do you know if gargoyle firmware can manage the file number limitation for the media server?

Know I am sorry i have never used it that way.