Gargoyle Forum

Posted: **Fri Dec 06, 2013 2:15 am**

i disable the lan connection by mistake and need to fix this router
hope i can fix it because is a friend's router

i was playing with it and changing settings and without knowing i change the settings for lan
the router still works for the purposes but no changes can be made trough the web interface with null communication to restore back the lan settings

am using a tl-wr741nd version 4.20

this is how it was before any changes

Code: Select all

DHCP habilitado. . . . . . . . .  : No
Autoconfiguración habilitada. . . : Sí
 Dirección IP. . . . . . . . . . . : 10.0.0.142
Máscara de subred . . . . . . . . : 255.255.255.0
Puerta de enlace predeterminada   : 10.0.0.2
Servidor DHCP . . . . . . . . . . : 10.0.0.2
Servidores DNS . . . . . . . . . .: 10.0.0.2

and this is how it is at the moment

Code: Select all

Sufijo de conexión específica DNS :
Dirección IP de autoconfiguración : 169.254.251.209
Máscara de subred . . . . . . . . : 255.255.0.0
Puerta de enlace predeterminada

i tried the failsafe mode and: no luck communicating or ping
i set my pc to static ip 192.168.1.2

Code: Select all

[Administrador] C:\Documents and Settings\Administrador$ telnet 192.168.1.1
Conectándose a 192.168.1.1...No se puede abrir la conexión al host, en puerto 23
: Error en la conexión

 [Administrador] C:\Documents and Settings\Administrador$ telnet 169.254.251.209

Conectándose a 169.254.251.209...No se puede abrir la conexión al host, en puert
o 23: Error en la conexión

 [Administrador] C:\Documents and Settings\Administrador$ telnet 10.0.0.2
Conectándose a 10.0.0.2...No se puede abrir la conexión al host, en puerto 23: E
rror en la conexión

 [Administrador] C:\Documents and Settings\Administrador$ telnet 10.0.0.2
Conectándose a 10.0.0.2...No se puede abrir la conexión al host, en puerto 23: E
rror en la conexión

 [Administrador] C:\Documents and Settings\Administrador$ telnet 192.168.0.1
Conectándose a 192.168.0.1...No se puede abrir la conexión al host, en puerto 23
: Error en la conexión

Posted: **Fri Dec 06, 2013 2:23 am**

https://forum.openwrt.org/viewtopic.php?id=37686

Check that thread for info

Also check the OpenWRT Wiki for the WR741ND

You will have to recover via Serial Recovery

Posted: **Fri Dec 06, 2013 11:43 am**

thanks i was afraid it would come to recover via Serial Recovery
i will try to learn all i can so don't brick my unit

Gargoyle Forum

lan disable by mistake need help

lan disable by mistake need help

Re: lan disable by mistake need help

Re: lan disable by mistake need help