help me with tl-wr1043nd : bricked?
Posted: Sun Nov 24, 2013 7:04 pm
Hello,
I'm desperate,
I installed the firmware: gargoyle_1.4.7-ar71xx-tl-WR1043ND-v1-squashfs-factory.bin on my tl-WR1043ND and the operation went well.
Subsequently, on the first screen I tried to set it as an access point by setting
ip: 192.168.1.1
Subnet: 255.255.255.0
gw ip: 192.168.1.254
SSID to join: my master wifi
ssid to broadast: albenTPrepeater
at the end of the page i clicked the button to SAVE.
The wifi network does not work, maybe I did something wrong setting, but the worst thing is that i cant enter into the router from browser!
If I write from the browser: 192.168.1.1 does not open anything!
I tried to hold RESET button for 10 seconds, but NOTHING happens.
my smartphone see the network: albenTPrepeater, but it can not connect.
"PWR" and "SYS" led are green
i'm not able to change nothing..what can i do?
Please explain me with easy words, because i'm not an expert.
I'm desperate,
I installed the firmware: gargoyle_1.4.7-ar71xx-tl-WR1043ND-v1-squashfs-factory.bin on my tl-WR1043ND and the operation went well.
Subsequently, on the first screen I tried to set it as an access point by setting
ip: 192.168.1.1
Subnet: 255.255.255.0
gw ip: 192.168.1.254
SSID to join: my master wifi
ssid to broadast: albenTPrepeater
at the end of the page i clicked the button to SAVE.
The wifi network does not work, maybe I did something wrong setting, but the worst thing is that i cant enter into the router from browser!
If I write from the browser: 192.168.1.1 does not open anything!
I tried to hold RESET button for 10 seconds, but NOTHING happens.
my smartphone see the network: albenTPrepeater, but it can not connect.
"PWR" and "SYS" led are green
i'm not able to change nothing..what can i do?
Please explain me with easy words, because i'm not an expert.
