TL-WR1043ND(DE) V1.2 no ping after update to Gargoyle 1.4.7
Posted: Tue Oct 15, 2013 5:14 am
After updating from original firmware to Gargoyle, only PWR shows, Sys shortly flashes all 4 LAN/WAN Ports flashes short then nothing.
If i plug in LAN it stays stable, also PWR is stable.
No ping possible, no telnet.
I tried Reset 30-30-30 with no change, failsafe with pressing qss fast after pluging in did not work, sys only shows up very short but does not react for failsafe.
Are there any other ways then opening the case and doing a tftp by usb ttl connect?
I remember i recovered once a wdr4300 by tftp without opening the cover only by lan and ubuntu.
Is this possible somehow too?
Which version is save for the TL-WR1043ND(DE) Ver 1.2?
Serial starts with 12 ...
Any help is appreciated
If i plug in LAN it stays stable, also PWR is stable.
No ping possible, no telnet.
I tried Reset 30-30-30 with no change, failsafe with pressing qss fast after pluging in did not work, sys only shows up very short but does not react for failsafe.
Are there any other ways then opening the case and doing a tftp by usb ttl connect?
I remember i recovered once a wdr4300 by tftp without opening the cover only by lan and ubuntu.
Is this possible somehow too?
Which version is save for the TL-WR1043ND(DE) Ver 1.2?
Serial starts with 12 ...
Any help is appreciated