Page 1 of 1
Advice on TL-WR1043ND from DD-WRT to Gargoyle
Posted: Mon Sep 30, 2013 9:15 pm
by Gary.M
I have a WR1043ND, V1.9. Currently running DD-WRT. Would like to move to Gargoyle if possible.
Could someone who has done this please be kind enough to advise the procedure they followed?
I presume the file I will need is:
http://www.gargoyle-router.com/download ... actory.bin
Thanks
Re: Advice on TL-WR1043ND from DD-WRT to Gargoyle
Posted: Mon Sep 30, 2013 11:18 pm
by om63
Go first to original tplink firmware and then flash gargoyle.
And please first read after ask
there is the same question on page 2
http://www.gargoyle-router.com/phpbb/vi ... f=5&t=4642
Re: Advice on TL-WR1043ND from DD-WRT to Gargoyle
Posted: Mon Sep 30, 2013 11:22 pm
by Gary.M
OK, I was hoping it may be possible to go directly from DD-WRT to Gargoyle, has anyone done that?
Re: Advice on TL-WR1043ND from DD-WRT to Gargoyle
Posted: Sun Oct 06, 2013 4:28 pm
by asantaga
I tried, but failed.. cant remember what .. but I found going to the original tplink then gargoyle worked flawlessly each time
Re: Advice on TL-WR1043ND from DD-WRT to Gargoyle
Posted: Mon Oct 07, 2013 1:18 pm
by ektus
Gary.M wrote:OK, I was hoping it may be possible to go directly from DD-WRT to Gargoyle, has anyone done that?
I did it, but not on the 1043, but on a 703. Original firmware is chinese, and I wasn't willing to install that one
IIRC, I had to update from the telnet login (mtd and such), as it didn't work from the web updater.
Regards
Ektus.