Page 1 of 1
DSL stats Monitoring
Posted: Mon Aug 05, 2013 7:42 pm
by yousaf465
Is it possible to use gargoyle to Monitor DSL stats such SNR, attenuation on a gargoyle device.
Just like it monitor bandwidth. only this time it will query the stats over telnet and log a graph.
ATM I have to use PC apps e.g
http://www.s446074245.websitehome.co.uk/
Re: DSL stats Monitoring
Posted: Tue Aug 13, 2013 10:58 am
by pyed
this will echo back some helpful info
Re: DSL stats Monitoring
Posted: Wed Aug 14, 2013 12:53 am
by yousaf465
Code: Select all
/tmp/tmp.sh: line 1: /etc/init.d/dsl_control: not found
Success
Got this
Re: DSL stats Monitoring
Posted: Wed Aug 14, 2013 7:28 am
by pyed
yousaf465 wrote:Code: Select all
/tmp/tmp.sh: line 1: /etc/init.d/dsl_control: not found
Success
Got this
maybe you are using a router not a modem ?
I'm using buffalo WBMR, it's a modem with Gargoyle on, i get the following info
Code: Select all
root@Main:~# /etc/init.d/dsl_control status
Chipset: Ifx-AR9 1.2
Line State: UP [0x801: showtime_tc_sync]
Data Rate: 16.382 Mb/s / 1.022 Mb/s
Line Attenuation: 33.0dB / 22.4dB
Noise Margin: 8.2dB / 8.5dB
Line Uptime: 9h 35m 3s