mess up with the setting need help
Posted: Wed Jun 26, 2013 10:53 pm
hello, i'm using gargoyle set by my friend last year, now i cannot contact my friend by some circumstances, so i change the setting by myself
here my old setting
Modem(bridge) -> (via WAN slot)Wireless router (PPPoE) -> DCHP
DCHP 192.168.2.2- 192.168.2.254
set the router IP into 192.168.2.1
due the WAN slot router not responding, caused by rain storm yesterday
i change my setting on wireless router
from ethernet LAN modem -> WAN wireless router
into ethernet LAN modem -> LAN 1-4 wireless router
this way i still could using my wireless router wifi by modified some setting
then i change the network setting into
modem(PPPoE) -> (via LAN slot 1-4) wireless router (static IP) -> DCHP
DCHP 192.168.2.2- 192.168.2.254
set the router IP into 192.168.2.1
while using static ip
192.168.1.10
gateway 192.168.1.1
not all client could connect into the wifi
then i'm using default static IP from gargoyle (i forget the detail)
10.0.0.10
gateway 127.0.0.1
all client could connect to the wifi, but more problem occured
the problems:
0. all connected clients could connect into my modem setting (192.168.1.1)
1. i cannot access and monitor my wireless router via 192.168.2.1
2. looks like DHCP not working properly, all connected client, got IP 192.168.1.2-192.168.1.254
my old QOS bandwitdh monitoring using DHCP 192.168.2.2 - 192.168.2.254
so all client get louse bandwith
what should i do so
1. i could access my wireless router again
2. i could using DHCP setting from wireless router so my old QOS still working properly
here my old setting
Modem(bridge) -> (via WAN slot)Wireless router (PPPoE) -> DCHP
DCHP 192.168.2.2- 192.168.2.254
set the router IP into 192.168.2.1
due the WAN slot router not responding, caused by rain storm yesterday
i change my setting on wireless router
from ethernet LAN modem -> WAN wireless router
into ethernet LAN modem -> LAN 1-4 wireless router
this way i still could using my wireless router wifi by modified some setting
then i change the network setting into
modem(PPPoE) -> (via LAN slot 1-4) wireless router (static IP) -> DCHP
DCHP 192.168.2.2- 192.168.2.254
set the router IP into 192.168.2.1
while using static ip
192.168.1.10
gateway 192.168.1.1
not all client could connect into the wifi
then i'm using default static IP from gargoyle (i forget the detail)
10.0.0.10
gateway 127.0.0.1
all client could connect to the wifi, but more problem occured
the problems:
0. all connected clients could connect into my modem setting (192.168.1.1)
1. i cannot access and monitor my wireless router via 192.168.2.1
2. looks like DHCP not working properly, all connected client, got IP 192.168.1.2-192.168.1.254
my old QOS bandwitdh monitoring using DHCP 192.168.2.2 - 192.168.2.254
so all client get louse bandwith
what should i do so
1. i could access my wireless router again
2. i could using DHCP setting from wireless router so my old QOS still working properly