Gargoyle Forum

Posted: **Thu Jun 06, 2013 9:46 pm**

Gargoyle 1.5.9 running on
NETGEAR WNDR3800 router, connected to
NETGEAR DGN1000 in "Modem only" mode

System > Web Access
Remote Web Admin Access: HTTPS
Remote HTTPS Port: 3000

My public IP is 122.148.57.15 and is static (confirmed this with my ISP)

My understanding is I just type
https://122.148.57.15:3000
and I should see the login page, but all I get are "Can't connect" errors from any browser.

I am testing this from a PC connected to the router's network but I didn't think this would be a problem. I tried pinging that IP address and I get instant replies at 32ms.

Why can't I remotely connect, any ideas?

Posted: **Fri Jun 07, 2013 3:14 am**

You need to setup port forwards in the Netgear DGN1000

Forward port 3000 to the IP of the Netgear WNDR3800

Or - if you have a DMZ option on the Netgear DGN1000

Put the Netgear WNDR3800 IP as the DMZ IP in the DGN1000

Gargoyle Forum

Remote access, here's what I've tried

Remote access, here's what I've tried

Re: Remote access, here's what I've tried