Page 1 of 1
tp-link 1043nd V1.9
Posted: Sun May 12, 2013 4:54 pm
by erez669
i want to know if the hardware V1.9 of tp-link tl-WR1043nd is supported by your firmware, because i'm afraid to brick the unit.
if it's not supported, please let me know.
thanks
Re: tp-link 1043nd V1.9
Posted: Mon May 13, 2013 12:34 pm
by DoesItMatter
http://wiki.openwrt.org/toh/tp-link/tl-wr1043nd
See that page
You will have to follow the info and downgrade the bootloader
If you are afraid of bricking it - then don't even try to flash
Gargoyle / OpenWRT on that router - there is always a risk on
flashing any 3rd party firmware.
Re: tp-link 1043nd V1.9
Posted: Mon May 13, 2013 12:54 pm
by erez669
i succesfully flashed version 1.4.7 gargoyle on my unit today, but i have a wifi drops and slow speed on it, on the LAN everything OK, but wifi isn't.
Re: tp-link 1043nd V1.9
Posted: Mon May 13, 2013 2:43 pm
by jorgecorazondeleon
erez669 wrote:i succesfully flashed version 1.4.7 gargoyle on my unit today, but i have a wifi drops and slow speed on it, on the LAN everything OK, but wifi isn't.
Puts: Channel Width:40mhz
Re: tp-link 1043nd V1.9
Posted: Tue May 14, 2013 12:19 pm
by erez669
my issue with wifi seems to be solved, i change the channel to 4 and set it to 20Mhz instead of 40Mhz, it seems more stable till now.
if the problem persist in the future, i will write it here.