Page 1 of 2
Gargoyle-ispy 2013-May-09.7z
Posted: Thu May 09, 2013 9:18 am
by ispyisail
USE AT YOUR OWN RISK
Gargoyle-ispy 2013-May-09.7z
http://goo.gl/Hd47W
Done some basic and all is good
see updates here
http://www.gargoyle-router.com/gargoyle
Re: Gargoyle-ispy 2013-May-09.7z
Posted: Thu May 09, 2013 11:42 am
by firstreflex
Hi,
Attitude_adjustment/12.09 is included in this new firmware ?
Thank
Re: Gargoyle-ispy 2013-May-09.7z
Posted: Thu May 09, 2013 1:57 pm
by jorgecorazondeleon
Router:wr1043nd v 1.8
ISP: fibertel 6 MB/s Dinamics IP
Up and running.
I do not notice changes from the previous version:Gargoyle-ispy 2013-March-31
Re: Gargoyle-ispy 2013-May-09.7z
Posted: Fri May 17, 2013 3:38 pm
by rt_rex
Success on TL-WR741ND V4.2
Upgraded from 1.5.9 no problems so far.
I added the 13 channel fix for europe .
Code: Select all
ssh root@openwrt
cd /tmp/
wget http://luci.subsignal.org/~jow/reghack/reghack.elf
chmod +x reghack.elf
cp /lib/modules/*/ath.ko .
cp /lib/modules/*/cfg80211.ko .
./reghack.elf ath.ko
./reghack.elf cfg80211.ko
mv *.ko /lib/modules/*/
reboot
EDIT:
13 channels working OK
Just added some adjustments for outdoor
Code: Select all
uci set wireless.radio0.distance=20000
uci set wireless.radio0.noscan=0
uci set wireless.radio0.beacon_int=120
uci set wireless.radio0.short_preamble=0
uci set wireless.radio0.iapp_interface=radio0
uci commit
wifi
I would like to leave a naming for the development releases
"Gargoyle X" or
"Gargoyle Dark X"
Re: Gargoyle-ispy 2013-May-09.7z
Posted: Sat May 18, 2013 1:13 pm
by erez669
how to install this? i have gargoyle 1.5.2 now, wifi is instable, LAN is OK.
and can i install directly the openwrt?
Re: Gargoyle-ispy 2013-May-09.7z
Posted: Sat May 18, 2013 3:42 pm
by ispyisail
erez669 wrote:how to install this? i have gargoyle 1.5.2 now, wifi is instable, LAN is OK.
and can i install directly the openwrt?
x-fta ???
Re: Gargoyle-ispy 2013-May-09.7z
Posted: Sat May 18, 2013 4:05 pm
by erez669
ok i will explain again:
this file Gargoyle-ispy 2013-May-09.7z is not a firmware? and if this firmware, how to install this on the router TP-LINK 1043ND?
i have a lot of wifi issues after installing version 1.5.2 of gargoyle firmware, i decide to upgrade from 1.4.7.
thanks in advanced for help.
Re: Gargoyle-ispy 2013-May-09.7z
Posted: Sun May 19, 2013 2:47 am
by ispyisail
erez669 wrote:ok i will explain again:
this file Gargoyle-ispy 2013-May-09.7z is not a firmware? and if this firmware, how to install this on the router TP-LINK 1043ND?
i have a lot of wifi issues after installing version 1.5.2 of gargoyle firmware, i decide to upgrade from 1.4.7.
thanks in advanced for help.
If you done't know how to install these builds you probably shouldn't use them.
having said that..............
unzip using 7zip
find the file for your router
use the gargoyle web interface to install
Re: Gargoyle-ispy 2013-May-09.7z
Posted: Sun May 19, 2013 4:29 am
by erez669
ok thanks, i don't want to use them, i just want to understand how.
i'm using gargoyle 1.5.2, i want to know when you release a new updated firmware that solve the wifi instability in 1043nd router of tp-link?
all other functions is working fine except the wifi that disconnect a lot of times and connecting without surfing the net.
thanks again for answer.
Re: Gargoyle-ispy 2013-May-09.7z
Posted: Sun May 19, 2013 4:37 am
by ispyisail
I think you will find the wifi much improved in this build
http://www.gargoyle-router.com/phpbb/vi ... =14&t=4256
Based on your other comments i'm worried that you might brick your router and not be able to recover..................................