Gargoyle Forum

I m newbie here
I was trying to install "Gargoyle firmware" Firmware for Tp-link tl-wr841n
after installed successful i reboot router, after that i cannot able to open the web browser/wifi/anything (even tried many ips manuall/automatically assigned) of TP-link (192.168.1.1)
I want my router firmware revert back !!

i had tried this method from this LINK for revert back
www.gargoyle-router.com/phpbb/viewtopic.php?f=5&t=3628

but now facing troubleshooting in STEP 4:
pscp -scp <firmware-filename.bin> root@192.168.1.1:/tmp
an error is being occured: the filename, directory name is invalid
http://i42.tinypic.com/33y2xq9.jpg

also i m trying to ping 192.168.1.1 but nothing response
awaiting any experts precious reply

http://wiki.openwrt.org/doc/howto/generic.failsafe

try this

More info needed.

The revert info you were trying to follow is if you had OpenWRT
on your router and were trying to flash Gargoyle.

If you had TP-Link stock firmware and were trying to flash Gargoyle,
you need to follow the link here to TFTP firmware back.

http://wiki.openwrt.org/toh/tp-link/tl-wr841nd

If you have Windows Vista, Windows 7, or Windows 8, you will have
a hard time TFTP flashing the firmware back. You will need to use
a Windows XP or Linux machine, or put a switch between the
PC and the router before trying to TFTP.

oOOOppppsss !!
ALL R TOO HARD TO UNDERSTAND BY ME
ANY EASY WAY TO REVERT STOCK FIRMWARE BACK !!
ACTUALLY I M NOT GETTING WHERE TO START
IT IS TOO MANY STEPS THERE :

There is no easier way - the steps I posted are what you
have to follow.

Anytime you flash 3rd party firmware, you have to do additional
steps to recover back to factory