Page 1 of 1

wireless problem 1.5.7 on WRT54GS

Posted: Mon Oct 29, 2012 8:01 pm
by gwhm
Hi, Just Install 1.5.7 on wrt54gs. Everything looks good except wireless.

lost connection 3-4 times every week. Reboot or Power off won't help. Only solution is change wireless connection transmit power. like from 20 to 19dBM. It helps to get wireless connection. But it lasts only 2-3 day. Computer with cable to modem has no problem at all for all the time.

Please give me clue. thanks

Re: wireless problem 1.5.7 on WRT54GS

Posted: Tue Oct 30, 2012 9:03 am
by lerim
We had the same issue.
DoesItMatter suggest the following.


Try Gargoyle 1.2.5

Then try 1.3.9

1.3.0 - 1.3.9 are using the Broadcom 2.4 drivers.

1.3.10 and up use the Broadcom 2.6 drivers

See this post:

http://www.gargoyle-router.com/phpbb/vi ... f=3&t=1101

Re: wireless problem 1.5.7 on WRT54GS

Posted: Tue Oct 30, 2012 11:06 pm
by gwhm
Ok, thanks, Do you try install 1.2.5? will this version have some function as latest version. How about wireless drop off? thanks again
lerim wrote:We had the same issue.
DoesItMatter suggest the following.


Try Gargoyle 1.2.5

Then try 1.3.9

1.3.0 - 1.3.9 are using the Broadcom 2.4 drivers.

1.3.10 and up use the Broadcom 2.6 drivers

See this post:

http://www.gargoyle-router.com/phpbb/vi ... f=3&t=1101

Re: wireless problem 1.5.7 on WRT54GS

Posted: Tue Nov 06, 2012 3:08 pm
by lerim
Hi gwhm!

We're trying 1.3.9 WRT54G and so far so good.
We'll update later on if any hiccups.
If not we'll downgrade to 1.2.5 and go up.

Re: wireless problem 1.5.7 on WRT54GS

Posted: Wed Nov 07, 2012 9:23 am
by gwhm
all right, I try downgrade to 1.2.5, but fail.

1. via sysupgrade. no success. still 1.5.7
2 tftp time out

don't know how to downgrad. please help

Re: wireless problem 1.5.7 on WRT54GS

Posted: Mon Nov 12, 2012 10:14 pm
by lerim
I've used what's recommended on this link from openwrt
http://wiki.openwrt.org/doc/howto/generic.flashing.tftp

I'm using a Mac OS X TFTP Client to load the image.
Did you follow the directions to downgrade properly?
Pls. list your steps and so we can help you out.