TP-LINK WNR1043ND
Posted: Mon Oct 29, 2012 2:06 pm
Got my router set up as a repeater. Wireless networking is working fine. My server connected to the repeater VIA Ethernet is not.
Im completely new to the whole router business so if anyone could help would be great
Bridge IP: 192.168.0.199
Subnet Mask: 255.255.255.0
AP/Gateway IP: 192.168.0.1
Wan Ethernet Port: Disabled
Custom DNS: x
Repeater: Enabled
Operation Mode: N+g+b
Channel Width: 20mhz ( can i put this to 40?)
SSID to Join: 408
SSID to Broadcast: 408-2
Wireless Channel: 11
Im completely new to the whole router business so if anyone could help would be great
Bridge IP: 192.168.0.199
Subnet Mask: 255.255.255.0
AP/Gateway IP: 192.168.0.1
Wan Ethernet Port: Disabled
Custom DNS: x
Repeater: Enabled
Operation Mode: N+g+b
Channel Width: 20mhz ( can i put this to 40?)
SSID to Join: 408
SSID to Broadcast: 408-2
Wireless Channel: 11