Gargoyle Forum

hi.
i have a tp link tl-mr3420 with compass 889 dongle.
i update this firmware.
openwrt-ar71xx-generic-tl-mr3420-v1-squashfs-sysupgrade.bin
with this package.
chat_2.4.5-6_ar71xx comgt_0.32-9_ar71xx kmod-usb-serial_3.3.8-1_ar71xx kmod-usb-serial-option_3.3.8-1_ar71xx kmod-usb-serial-wwan_3.3.8-1_ar71xx libncurses_5.7-5_ar71xx libusb_0.1.12-3_ar71xx nano_2.2.6-1_ar71xx terminfo_5.7-5_ar71xx usb-modeswitch_1.2.3-2_ar71xx usb-modeswitch-data_20120120-1_ar71xx

nano /etc/config/network
config interface 'wan'
option ifname 'ppp0'
option proto '3G'
option device '/dev/ttyUSB2'
option apn 'free'

nano/etc/chatscripts/3g.chat
ABORT BUSY
ABORT 'NO CARRIER'
ABORT ERROR
REPORT CONNECT
TIMEOUT 10
"" "AT&F"
OK "ATE1"
OK 'AT+CGDCONT=1,"IP","$USE_APN"'
SAY "Calling UMTS/GPRS"
TIMEOUT 30
OK "ATD*99#"
CONNECT ' '

dmesg
[ 12.310000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 12.480000] usbcore: registered new interface driver usbserial
[ 12.480000] USB Serial support registered for generic
[ 12.490000] usbcore: registered new interface driver usbserial_generic
[ 12.500000] usbserial: USB Serial Driver core
[ 12.550000] USB Serial support registered for GSM modem (1-port)
[ 12.560000] usbcore: registered new interface driver option
[ 12.560000] option: v0.7.2:USB Driver for GSM modems
[ 17.150000] device eth0 entered promiscuous mode
[ 46.270000] eth0: link up (1000Mbps/Full duplex)
[ 46.270000] br-lan: port 1(eth0) entered forwarding state
[ 46.280000] br-lan: port 1(eth0) entered forwarding state
[ 48.280000] br-lan: port 1(eth0) entered forwarding state
[ 553.360000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 553.510000] usb 1-1: config 1 has an invalid interface number: 7 but max is 4
[ 553.510000] usb 1-1: config 1 has no interface number 2

the 3G light on the router is lit but dongle is not working what is wrong.
thank.

hi.
i find it http://translate.google.com/translate?h ... openwrt-3g
with my Sierra Wireless 889 i nead kmod-usb-sierrawireless-DirectIP

root@OpenWrt:/tmp# opkg install kmod-usb-sierrawireless-directip_3.3.8-10_ar71xx
.ipk
Installing kmod-usb-sierrawireless-directip (3.3.8-10) to root...
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-usb-sierrawireless-directip:
* kmod-usb-net *
* opkg_install_cmd: Cannot install package kmod-usb-sierrawireless-directip.

i find it for my dongle compass 889.
http://translate.google.fr/translate?sl ... openwrt-3g
i dont know if i use kmod-usb-sierrawireless-directip or kmod-usb-serial-sierrawireless
thank.i think kmod-usb-sierrawireless-directip is working.

after i have this packages:
usb-modeswitch-data
usb-modeswitch
terminfo
ppp
nano
libusb
ibncurses
kmod-usb-serial-wwan
kmod-usb-serial-option
kmod-usb-serial
kmod-usb-net
kmod-usb-core
kmod-usb
kmod-ppp
comgt
chat
kmod-usb-ohci
kmod-usb-uhci

my apn is free
phone is *99#

uci del network.wan
uci set network.wan=interface
uci set network.wan.proto=3g
uci set network.wan.service=umts
uci set network.wan.device=/dev/ttyUSB0
uci set network.wan.apn=free
uci commit network
ifup wan

/etc/chatscripts/3g.chat
/etc/config/network
dmesg
[ 12.680000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 12.700000] uhci_hcd: USB Universal Host Controller Interface driver
[ 12.900000] usbcore: registered new interface driver usbserial
[ 12.900000] USB Serial support registered for generic
[ 12.940000] usb 1-1: config 1 has an invalid interface number: 7 but max is 4
[ 12.950000] usb 1-1: config 1 has no interface number 2
[ 12.960000] usbcore: registered new interface driver usbserial_generic
[ 12.970000] usbserial: USB Serial Driver core
[ 13.000000] USB Serial support registered for Sierra USB modem
[ 13.000000] sierra 1-1:1.0: Sierra USB modem converter detected
[ 13.010000] usb 1-1: Sierra USB modem converter now attached to ttyUSB0
[ 13.020000] sierra 1-1:1.1: Sierra USB modem converter detected
[ 13.030000] usb 1-1: Sierra USB modem converter now attached to ttyUSB1
[ 13.030000] sierra 1-1:1.3: Sierra USB modem converter detected
[ 13.040000] usb 1-1: Sierra USB modem converter now attached to ttyUSB2
[ 13.050000] sierra 1-1:1.4: Sierra USB modem converter detected
[ 13.060000] usb 1-1: Sierra USB modem converter now attached to ttyUSB3
[ 13.060000] usbcore: registered new interface driver sierra
[ 13.070000] sierra: v.1.7.40:USB Driver for Sierra Wireless USB modems
[ 13.100000] usb 1-1: Warning: Firmware does not have DHCP support
[ 13.100000] sierra_net 1-1:1.7: wwan0: register 'sierra_net' at usb-ehci-platform-1, Sierra Wireless USB-to-WWAN Modem, c2:1f:fe:09:01:07
[ 13.120000] usbcore: registered new interface driver sierra_net
[ 13.170000] USB Serial support registered for GSM modem (1-port)
[ 13.180000] usbcore: registered new interface driver option
[ 13.190000] option: v0.7.2:USB Driver for GSM modems
[ 17.980000] device eth0 entered promiscuous mode
[ 18.580000] eth0: link up (1000Mbps/Full duplex)
[ 18.580000] br-lan: port 1(eth0) entered forwarding state
[ 18.590000] br-lan: port 1(eth0) entered forwarding state
[ 20.590000] br-lan: port 1(eth0) entered forwarding state
root@OpenWrt:~#

it s maby a problem Warning: Firmware does not have DHCP support
thank.

How do i share internet connection to ps3 with a huawei e367 dongle? i watched all the guides and i know how to share and stuff but when i do it whit this dongle huawei e367 it wont work. Before my current dongle i had the Nokia CS17 dongle and it worked but i had to change because it was so slow. And huawei wont let me share connection to the ps3.
___________________________________
keyword research ~ keyword tool ~ keyword tracking ~ affiliate elite