Page 1 of 1
DIR-300 DD-WRT microbootloader
Posted: Mon Sep 14, 2009 12:41 pm
by reginaldo10
How can I install Gargoyle in a DD-WRT microbootloader?
http://www.dd-wrt.com/phpBB2/viewtopic. ... &start=630
Thanks!
Re: DIR-300 DD-WRT microbootloader
Posted: Mon Sep 14, 2009 2:11 pm
by reginaldo10
I installed the firmware, but the bootloader stays in loop.
Re: DIR-300 DD-WRT microbootloader
Posted: Tue Sep 15, 2009 3:04 pm
by DoesItMatter
IF you were using the newer version of DD-WRT, it has just the linux.bin file you load. You would probably need to change your fconfig settings. Try and use the Fon-Flash utility thats in the download section and flash the Atheros chipset version.
Re: DIR-300 DD-WRT microbootloader
Posted: Wed Sep 16, 2009 9:10 am
by reginaldo10
I did that (installed a atheros version of gargoyle).
but the device did not boot the firmware.
leds blinking fast (port 4 to port wan) like looping.
and keeps doing that untill I press reset button.
Re: DIR-300 DD-WRT microbootloader
Posted: Wed Sep 16, 2009 10:40 am
by DoesItMatter
I would reload fresh.
fis init -f
Do that command from the redboot command line
It takes about 1-2 minutes and completely erases nvram
Then reload the 2 atheros files:
gargoyle_1.0.10-atheros-root.squashfs
gargoyle_1.0.10-atheros-vmlinux.lzma
and make sure the fconfig has vmlinux.bin.l7 and not linux