Gargoyle Forum

USE AT YOUR OWN RISK

Pre Release

OpenVPN plus other fixes


http://goo.gl/43hu1

update

I suspect the build above is missing the last patch

Here is my new "Full Build"

http://goo.gl/GNDIR

Have just tested the above build and its good

I tested on TL-WR1043ND is working good job, but I don't know how to configure OpenVPN please help, thanks

can you describe the set-up you require, there are many different scenario's

I need setup the VPN server in my working place, so I can use VPN client in other place access internal software and use my working place's IP access web and some software required my working place's IP, Thx

ispyisail wrote:can you describe the set-up you require, there are many different scenario's

With OpenVPN it works as "server" and "client"

you an have "router to router" or "router to PC" with this model

Assuming your work is your "openVPN Server" does it have fixed or Dynamic IP address

also

are you using PPPoE or PPPoA at your work

are you using another firewall at your work? (excluding the one on your DSL router)

ispyisail wrote:also

are you using PPPoE or PPPoA at your work

are you using another firewall at your work? (excluding the one on your DSL router)

I'm in NZ too

VPN server in my working place works as "server"
other place(my home) works as "client"
better to be "router to PC" model
Cheers

ispyisail wrote:With OpenVPN it works as "server" and "client"

you an have "router to router" or "router to PC" with this model

Assuming your work is your "openVPN Server" does it have fixed or Dynamic IP address