Gargoyle Forum

HI

I want to create 3 download rules:
1 - "2M_max", 2Mbps max. BW, no min BW
2 - "1M_minA" 1Mbps min BW, no max limit
3 - "1M_minA" 1Mbps min BW, no max limit

Rule 1, "2M_max", is to share up 2Mbps for two hosts, so Host A and B will share same rule 2M_max

Rule 2 and 3 is to garantee minimum BW for that 2 hosts, at 1Mpbs

So, if one host is connected at full load, it can use up to 2Mbps, but if Host A and Host B are connected at full load, total BW will be 2Mbps, 1Mbps for each one.

Is it possible ?

Dev_BR wrote:HI

I want to create 3 download rules:
1 - "2M_max", 2Mbps max. BW, no min BW
2 - "1M_minA" 1Mbps min BW, no max limit
3 - "1M_minA" 1Mbps min BW, no max limit

Rule 1, "2M_max", is to share up 2Mbps for two hosts, so Host A and B will share same rule 2M_max

Rule 2 and 3 is to garantee minimum BW for that 2 hosts, at 1Mpbs

So, if one host is connected at full load, it can use up to 2Mbps, but if Host A and Host B are connected at full load, total BW will be 2Mbps, 1Mbps for each one.

Is it possible ?

Tested, It do not work.
1 - "2M_max", 2Mbps max. BW, no min BW ->Host A and Host B
2 - "1M_minA" 1Mbps min BW, no max limit ->Host A
3 - "1M_minA" 1Mbps min BW, no max limit ->HostB

the 3 rules never work same time. I can see load at rule 1, but no load at rules 2 and 3.

If you are using v1.5.4 then the one class should automatically do what you want because classes always share per IP equally.

There is no need for the other classes.