Page 1 of 1
13 channel
Posted: Tue May 22, 2012 11:15 am
by GoUser
I have TL-WR841N(D) with original firmware. There is a posibility to use 12 and 13 channel. So I went onto 13 channel and I can have speed up to 30 Mbit/s instead of 8-12 on other channels (I think because of interference, there some alien access points around).
Is it too unstable to use 13 channel in gargoyle? It would be awsome if we could use this channel.
Thanks.
Re: 13 channel
Posted: Thu May 24, 2012 12:04 pm
by Hanselan-DE
Yes indeed the regulatory.bin in openwrt is broken and i filed several bugreports without reaction. On the end of this thread is a simple solution by replace the broken file.
http://smorgasbord.gavagai.nl/2010/09/w ... to-fix-it/
It works on gargoyle too. Means it give the channels that are allowed in the country domain.
Bye
Eric
Re: 13 channel
Posted: Thu May 24, 2012 1:14 pm
by popej
You are showing a working solution but I think your understanding of the problem is wrong. As far as I know regulatory.bin is correct and distribution of replacement file could be against regulations in many countries.
Re: 13 channel
Posted: Sat May 26, 2012 10:24 am
by GoUser
Wow, great!, thanks Hanselan-DE. I'll test that.
Do you mean I'll be able to select 12, 13 channel in Gargoyle user interface?
Re: 13 channel
Posted: Sun Jun 03, 2012 8:52 am
by GoUser
Yes, it works! Thanks a lot again. Now I am able to select 14 channels and can increase transmit power.
Re: 13 channel
Posted: Sun Nov 18, 2012 10:47 am
by cotarelo
Can't make it work
Code: Select all
root@Gargoyle:~# iw reg set ES
-ash: iw: not found
root@Gargoyle:~# ldd /sbin/crda
libnl-tiny.so => /usr/lib/libnl-tiny.so (0x2aabe000)
libm.so.0 => /lib/libm.so.0 (0x2aad6000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x2aaff000)
libc.so.0 => /lib/libc.so.0 (0x2ab1f000)
ld-uClibc.so.0 => /lib/ld-uClibc.so.0 (0x2aaa8000)
root@Gargoyle:~# regdbdump /usr/lib64/crda/regulatory.bin
-ash: regdbdump: not found
Re: 13 channel
Posted: Mon Jan 28, 2013 11:18 am
by Nilist
https://forum.openwrt.org/viewtopic.php ... 21#p190221
Confirmed working on 1.5.9 (gives you channel 12 & 13)
Re: 13 channel
Posted: Mon Jan 28, 2013 10:59 pm
by DoesItMatter