Page 3 of 3
Re: QoS configuration disappears after power loss and breaks
Posted: Thu Aug 27, 2015 6:29 pm
by thelordabdo
I am new to gargoyle , but I can Confirm that i faced the same issue with version 1.8.0 , My router : TP-Link TL-WR841N/ND v9 , and yes more than one window of Gargoyle where opened , but only one that i was changing .
*******************************
(EDIT)
I have tried to use just one window ( using Google chrome and IE ) , once i change any thing at the default rules at QOS (upload) , I canot save any thing at the QOS (Download) , as when i change the QOS ( Download) and click save changes , then going to the QOS (upload) then back to the QOS (Download) , I find that nothing i have made is saved at the QOS ( Download) , this is a series problem that preventing me from using the whole QOS , I really will appreciate any help .
Re: QoS configuration disappears after power loss and breaks
Posted: Thu Aug 27, 2015 8:05 pm
by coits
It's a known bug, just use one tab when updating QoS for download and upload then save it.
regards
Re: QoS configuration disappears after power loss and breaks
Posted: Thu Aug 27, 2015 9:27 pm
by thelordabdo
coits wrote:It's a known bug, just use one tab when updating QoS for download and upload then save it.
regards
Thanks , I have managed to solve it by hard reset the router , now i can can save both QOS download and upload , it seems that changing it while opening opening a new tab has destroyed the config file completely , so only a hard rest could solve it .
Re: QoS configuration disappears after power loss and breaks
Posted: Thu Aug 27, 2015 9:41 pm
by ispyisail
hard reset the router
This solves many problems
I don't know if this was your case but many people preserve setting on upgrade which causes no end of problems
Re: QoS configuration disappears after power loss and breaks
Posted: Wed May 09, 2018 7:35 am
by marcinkk
Version 1.9.2 on 1043ND V3 and the problem still exists.
I will try to follow the advice:
coits wrote:It's a known bug, just use one tab when updating QoS for download and upload then save it.
But mainly I wanted to write that I've encountered a similar problem when writing other configuration elements. The most annoying for me is Firewall -> Restrictions page. I need sometimes just to enable/disable one rule and than Save Changes. Sometimes works fine but sometimes my whole firewall configuration disappears
Is it RAM problem? Or script execution time problem?
Can it be somewhere configured? Can I increase the time for script execution after clicking save?
Re: QoS configuration disappears after power loss and breaks WAN
Posted: Tue May 15, 2018 11:56 am
by encro
It's seems to be a Session State Tracking issue.
Don't have the Gargoyle Interface open in multiple windows or tabs. Use Gargoyle only as 1 page open and it won't happen.
Re: QoS configuration disappears after power loss and breaks WAN
Posted: Tue May 15, 2018 2:11 pm
by d3fz
encro wrote:It's seems to be a Session State Tracking issue.
Don't have the Gargoyle Interface open in multiple windows or tabs. Use Gargoyle only as 1 page open and it won't happen.
+1
Also, try to always keep a recent backup of your settings, so if anything goes wrong, you can always manually restore it (WinSCP) in no time.