Gargoyle Forum

Hi

I have my Mikrotik Groove set to 192.168.88.1 (BRIDGE - client to connect to the Internet via WiFi) and Gargoyle router (TL-WR1043ND) set to 192.168.1.1 - home network routing. I have a public IP and port forwarding is set at the Gargoyle. MikroTik setup I can not connect via Gargoyle but only directly.

internet -- mikrotik groove -- Gargoyle router(WR1043ND) -- Client PC


I tried to set Gargoyle these instructions (Accessing your ADSL Modem In Bridge Mode) - but unsuccessfully. (http://www.gargoyle-router.com/wiki/dok ... ridge_mode)


i set in /etc/ppp/ip-up.d/modemaccess.sh

#ROUTER_IP=10.0.0.2
to
ROUTER_IP=192.168.88.2

Any ideas if it is possible to access the mikrotik with them connected through TL-WR1043ND?

Thanks for any ideas

Why doesn´t working the setting for the ADSL modem in bridge mode for Mikrotik in bridge mode? There should be no difference between Mikrotik and ADSL modem in bridge mode