Page 1 of 1

wrt160n

Posted: Thu Feb 02, 2012 10:59 pm
by adika
hi,anybody know if wrt160n is ok with gargoyle?if yes what build?
thanks

Re: wrt160n

Posted: Fri Feb 03, 2012 2:02 pm
by mix
What version of the WRT160N do you have?

Re: wrt160n

Posted: Fri Feb 03, 2012 4:56 pm
by DoesItMatter
http://www.gargoyle-router.com/download.php

If your device is not listed in the downloads section, then it is
not "officially" supported.

HOWEVER, some alternate versions do work, but it does take some
research / investigation / trial&error on your part.

Example - I have a D-Link DIR-601 - not listed as supported, but
hardware is almost identical to D-Link DIR-600, so I can flash the
DIR-600 firmware on my DIR-601 and it does work fine, only issue is
the LED's don't light up properly, but I don't care about them.

http://www.dd-wrt.com/wiki/index.php/Li ... 26_WRT160N

Checking there and some other sites, looks like the
WRT150N and WRT160N V1 and V1.1 ONLY
are almost identical, so you should be able to flash the
WRT150N firmware onto the WRT160N as long as your
WRT160N is V1 or V1.1 - if it's any other version - do not try it!