A forum to discuss the Gargoyle web interface for Openwrt
https://www.gargoyle-router.com/phpbb/
Looks like you are trying to do it on your windows machine and not on the router (through ssh).julezzth wrote:hey, nilist thank you for your guide. i tried to follow every step, but in the end after typing mtd -r write /tmp/fw.bin firmware, i got an error report (see screenshot) and now i am lost
i hope you can help me, i don`t know what to do now,
thx
http://img406.imageshack.us/img406/7569/winscp.jpg
You should select SSH, not SCP.julezzth wrote:but what did i wrong? i did it like in the youtube video?
- start winSCP, ip adress of router, select scp, login
but first he has to upload copy the new firmware to /tmp with winscp, selecting SCP, right??hnl_dk wrote:You should select SSH, not SCP.julezzth wrote:but what did i wrong? i did it like in the youtube video?
- start winSCP, ip adress of router, select scp, login
He does use winSCP as his SSH client (I prefer to use PuTTY directly).nebbia88 wrote:but first he has to upload copy the new firmware to /tmp with winscp, selecting SCP, right??hnl_dk wrote:You should select SSH, not SCP.julezzth wrote:but what did i wrong? i did it like in the youtube video?
- start winSCP, ip adress of router, select scp, login
I successfully flashed a v.7.1 router with Gargoyle 1.5.3 using this guide.Nilist wrote:OK, took the plunge and bought a TL-WR841N v7.2
As described by others, could not install the Gargoyle 1.4.5 v5 firmware through the TP-Link web interface (wrong HW version), so did the following:
1. Downloaded the latest OpenWRT build for v7 from here:
http://wiki.openwrt.org/toh/tp-link/tl-wr841nd
2. Downloaded the Gargoyle v5 factory image
3. Installed the OpenWRT firmware through the TP-Link Web UI
4. The OpenWRT came without LuCI web interface, so used PuTTY to telnet to router to set password
5. Used WinSCP to upload Gargoyle v5 factory image firmware to /tmp and rename to fw.bin
6. Opened a terminal window in WinSCP and executed(as described in reverting to original firmware in link above)Code: Select all
mtd -r write /tmp/fw.bin firmware
That's it! Now running Gargoyle 1.4.5 on TL-WR841 v7.2 almost without touching Linux
is there any way to reset the router or get access to it again? or did i brick it?
I didn't see it on screenshots and 