Page 1 of 2
Build - Revision d9a4129b
Posted: Thu Dec 01, 2011 1:26 pm
by ispyisail
Hi all
So far I've had 40 downloads of my unoffical build and only one comment
Downloads found here
http://www.gargoyle-router.com/phpbb/vi ... 2012#p8894
and here
http://www.gargoyle-router.com/phpbb/vi ... 2012#p8916
Can we have some feed back please!
Has the second build fixed the problems with the radio dropping out etc
Code: Select all
Revision d9a4129b
bump openwrt version farther, include newer ath9k fixes
ar71xx
http://goo.gl/wpvuq
Re: Build - Revision d9a4129b
Posted: Thu Dec 01, 2011 11:23 pm
by ispyisail
I've been doing some testing
This is some errors I get
Code: Select all
root@Gargoyle:/# warning: `smbd' uses 32-bit capabilities (legacy support in use)
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
Re: Build - Revision d9a4129b
Posted: Fri Dec 02, 2011 12:31 am
by mix
Is this bug report what you are seeing? Looks like ndb is actively trying to fix it. Maybe report your error, router model and your openwrt revision to the bug report... the more people the better. It looks like someone reported the exact same thing 8 days ago, so you should confirm the problem is not fixed (nor forgotten).
https://dev.openwrt.org/ticket/9654
I think you can safely ignore the samba error message.
Re: Build - Revision d9a4129b
Posted: Fri Dec 02, 2011 2:48 am
by Markuz Nightwind
Yes the last one seems to have fixed my wireless dropout problem on Tplink WR-1043ND (36 hours with like 6 hours playing games and no cut), thanks very much for these builds
)
Re: Build - Revision d9a4129b
Posted: Fri Dec 02, 2011 3:46 am
by ispyisail
My router appears to be working fine but im still getting these errors under load
Code: Select all
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
Re: Build - Revision d9a4129b
Posted: Sat Dec 03, 2011 2:38 am
by mix
Eric bumped openwrt to revision 29342 on Nov. 29th, because it included ath9k bug fixes (TP-Link 1043ND), but you reported yesterday on the openwrt message board problem not fixed with r29323... So you really aren't using the latest driver available are you?
Re: Build - Revision d9a4129b
Posted: Sat Dec 03, 2011 2:40 am
by ispyisail
update
I've been doing extensive tests with this build on a TP-Link TL-WR1043ND v1-1.8
This build is very stable when Tor is turned off
When Tor is turned on the router becomes unstable, reboots and I get the errors above
I suspect CPU and RAM undersized issues?
Will test with my RS pro to see
Re: Build - Revision d9a4129b
Posted: Sat Dec 03, 2011 2:47 am
by ispyisail
mix wrote:Eric bumped openwrt to revision 29342 on Nov. 29th, because it included ath9k bug fixes (TP-Link 1043ND), but you reported yesterday on the openwrt message board problem not fixed with r29323... So you really aren't using the latest driver available are you?
Code: Select all
---------------------------------------------------------------
| _____ _ |
| | __ \ | | |
| | | \/ __ _ _ __ __ _ ___ _ _| | ___ |
| | | __ / _` | '__/ _` |/ _ \| | | | |/ _ \ |
| | |_\ \ (_| | | | (_| | (_) | |_| | | __/ |
| \____/\__,_|_| \__, |\___/ \__, |_|\___| |
| __/ | __/ | |
| |___/ |___/ |
| |
|-------------------------------------------------------------|
| Gargoyle version 1.5.X | OpenWrt backfire branch |
| Gargoyle revision d9a4129 | OpenWrt revision r29323 |
| Built November 30, 2011 | Target ar71xx/ath9k_only_usb |
---------------------------------------------------------------
root@Gargoyle:/#
I suspect a bug in Eric's splash?
Re: Build - Revision d9a4129b
Posted: Sun Dec 04, 2011 2:19 am
by ispyisail
Update
Now using ubnt RSPro with "N" card
With Tor enabled I can not cash this router with the above faults.
I tried everything, this router is rock solid.
I would also like to report Tor is faster but I'm unsure if this is because of the router or a better connection?
Re: Build - Revision d9a4129b
Posted: Mon Dec 05, 2011 12:14 pm
by eramseth
Installed last evening on my WZR-HP-G300NH. So far it seems to not have the wireless dropouts I was experiencing previously, although I've only "tested" (aka, online gaming for a couple hours) for a couple of hours.
Note, though, that I haven't re-setup my QoS settings and things like that. I will report back once it's fully setup the way I like and has been running for a few days.
Oh and I guess I should note I am not using the new Tor capabilities.