Gargoyle Forum

Hi,

Can Gargoyle be installed on an TP-Link TL-WA801ND Access Point?

CPU: Atheros AR7240 rev 1.2 (0x00c2)
CPU Model: MIPS 24Kc V7.4
Wireless chipset: Atheros AR9238-AL1A
4mb Flash (Winbond 25Q32BVS1G)
32mb Ram (Zentel A3S56D40FTP)
(The PCB is very identical to: TP-Link TL-WA901ND)
(The WA801ND has other radio chip than WA901ND)
FCC ID = 'TE7WA801ND'
The router id is: 08 01 00 01

I like to use two of them in Bridge mode with WPA2 wireless security.
As for the original FW it alows only WEP in Bridge mode

Have you checked at openWRT?

What did thet say?

Can not find much about WA801ND at OpenWRT only this post:
https://forum.openwrt.org/viewtopic.php?id=30420

There is a modified WA901ND firmware (thx to LOM) at DD-WRT forum for the WA801ND for initial flashing so this comes handy for flashing to Gargoyle

You can find this threat here:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=140015
The file for WA-801ND is based on WA-901ND rev 16785.

The file is called: factory-to-ddwrt.rar (thx to LOM)
Can be found here:
http://www.dd-wrt.com/phpBB2/download.php?id=20740

There is also a revert DD-WRT to Stock firmware available (thx to LOM)
The file is called: wa801nv1_webrevert.rar
http://www.dd-wrt.com/phpBB2/download.php?id=21138

Hello

I'm Massimo, an Italian IT Manager.
I'm trying to to find the correct patch for TP-WA801ND but without success...until now

But your links doesn't work.

Can you please update it?

Really thanks!