Page 1 of 2
Support for Linksys WHW03 V1 (IPQ4019)
Posted: Fri Nov 14, 2025 2:50 pm
by jlvlnzl
Hi, could you add support for Linksys Velop WHW03 V1 (IPQ4019) (OpenWRT Supported)
Specs:
CPU check Qualcomm IPQ4019
CPU Type ARMv7 Cortex-A7
CPU Speed 716 MHz ( 4 cores )
Flash Chip Samsung KLM4G1FEPD
Flash Size 4 GiB (eMMC NAND)
RAM Size 512 MiB
RAM Chip Nanya NT5CC256M16DP-DI
ETH chip1 Qualcomm IPQ4019
ETH chip2 Qualcomm Atheros QCA8072
Ethernet Port Count 1-1GbE-WAN / 1-1GbE-LAN
Thanks!
Re: Support for Linksys WHW03 V1 (IPQ4019)
Posted: Sat Nov 15, 2025 12:59 am
by pythonic
Have you already
installed & run OpenWrt on this device?
Re: Support for Linksys WHW03 V1 (IPQ4019)
Posted: Sat Nov 15, 2025 7:28 am
by jlvlnzl
Yes, I have. Currently running OpenWrt24.10
Re: Support for Linksys WHW03 V1 (IPQ4019)
Posted: Sat Nov 15, 2025 6:59 pm
by Lantis
It’s possible.
If you’re willing to test a “beta” I will try to make one available. In the next few days.
Re: Support for Linksys WHW03 V1 (IPQ4019)
Posted: Sun Nov 16, 2025 3:17 pm
by jlvlnzl
No problem, let me know when it's ready to test it. Thanks
Re: Support for Linksys WHW03 V1 (IPQ4019)
Posted: Mon Nov 17, 2025 8:10 am
by Lantis
Re: Support for Linksys WHW03 V1 (IPQ4019)
Posted: Mon Nov 17, 2025 12:50 pm
by jlvlnzl
Just installed.
Glitch on basic web interface:
1. 2.4GHz Channel Width: Just 20mhz by default (no other option via web, 54Mbps), changing /etc/config/Wireless htmode to HT40 improves to 144Mbps.
2. 5GHz Operation Mode: goes to disabled via web although it working fine underneath.
Speedtest:
Wirered: 806/423Mbps
WiFi 5G: 424/412Mbps
Re: Support for Linksys WHW03 V1 (IPQ4019)
Posted: Mon Nov 17, 2025 4:46 pm
by Lantis
Oh right, it’s a triple wifi device.
The interface is going to be patchy at best, sorry. Gargoyle was not built for > 2 wifi radios.
I’m building something that caters for this but it’s 6 months away.
Re: Support for Linksys WHW03 V1 (IPQ4019)
Posted: Mon Nov 17, 2025 6:32 pm
by jlvlnzl
No problem, thanks a lot. It's working anyway..
Re: Support for Linksys WHW03 V1 (IPQ4019)
Posted: Tue Nov 18, 2025 12:43 am
by pythonic
jlvlnzl wrote: ↑Mon Nov 17, 2025 12:50 pm
Speedtest:
Wirered: 806/423Mbps
You might like to try setting packet steering to "Enabled (All CPUs)" instead of the default "Enabled" to see whether that gives you a little more download speed.