only DHCP Static IP Adress
Posted: Sun May 07, 2023 11:49 am
Hallo,
i have the following Question to my Gargoyle Router config:
Is it possible to set the DHCP server in Gargoyle so that it only assigns static IP addresses ?
I have to activate the DHCP server in the DHCP mask so that it assigns stored static IP addresses.
But that only works if I also enter a DHCP lease
(minimum 1 IP -Adress: e.g. from .120, to .120)
But I don't want to assign IP addresses from a lease, only the registered static IP addresses
How can I ensure that the DHCP server only assigns static IP addresses based on stored MAC addresses
thanks in advance
PID
i have the following Question to my Gargoyle Router config:
Is it possible to set the DHCP server in Gargoyle so that it only assigns static IP addresses ?
I have to activate the DHCP server in the DHCP mask so that it assigns stored static IP addresses.
But that only works if I also enter a DHCP lease
(minimum 1 IP -Adress: e.g. from .120, to .120)
But I don't want to assign IP addresses from a lease, only the registered static IP addresses
How can I ensure that the DHCP server only assigns static IP addresses based on stored MAC addresses
thanks in advance
PID